dwilfong
Well-Known Member
- Joined
- Jul 1, 2008
- Messages
- 5,968
I have bin thinking again and have some things I would like to throw out there.
Took a good look at a super charger at the LHS and had an Idea. What if you used a rear intake vac set up and removed the drum or made a new back plate. run the SC to this with no intake valving and put the carb on the SC intake. Make a tube from the SC to the back plate of the eng.
The SC would keep the case under pressure and you would have full flow to the cly when the ports where open.
Would work like a reed with out the flutter at high RPM. there would be no back flow thew the carb the SC would be the gate.
Any thoughts on this.
David
Took a good look at a super charger at the LHS and had an Idea. What if you used a rear intake vac set up and removed the drum or made a new back plate. run the SC to this with no intake valving and put the carb on the SC intake. Make a tube from the SC to the back plate of the eng.
The SC would keep the case under pressure and you would have full flow to the cly when the ports where open.
Would work like a reed with out the flutter at high RPM. there would be no back flow thew the carb the SC would be the gate.
Any thoughts on this.
David
Last edited by a moderator: