About time..........................

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Dude you know how hard it is to let off when it is pulling so hard.........................LOL

I have not bin use to having a boat set up or a prop that reacts so well to the throttle.

It takes some trust to know the boat will do exactly what you want when you want it to.

MAX is gaining my trust quick.

He will be all fixed up and ready to go tomorrow. Just picked up some CF to do the job..................................
default_biggrin.png


Tell Jim we need more props in different setups to test.......................2917/ 38 BAR 17 rake
 
Last edited by a moderator:
David,

Jim is making new molds just about every week these days.

I will give him the input.

Thanks For Testing,

Mark
 
Well the repairs are almost done.

I know Albert has made a full CF crap shooter so it can be done with a Eagle.

The next Eagle I get I will put a CF wrap on it.

That should be all it will need.

DSCN2936.JPG

DSCN2938.JPG
 
Well a water turkey got is neck broke this morning and broke a tube in the sponson on MAX.....................

LOL...... the water turkey ran over a water turkey.....LOL

Took it home redid it and all ready to race now.

That 2719 19rake 38 bar is the bomb.......................................

4 deg strut angle did the trick no more blow off......................

Harry had a 3017 17 rake 38 bar that Jim sent him. Looks like it will be great prop after grinding out the some of 15" of cup.......
default_ohmy.png


Blew his gas rigger right off the water.................LOL
 
Last edited by a moderator:
Well put the finishing touches on the new ABC 2719 19 rake 38 Bar prop.

6.5" cup ,a hub cut and a trailing edge back cut.

Will see how it spins up Thursday in open water at the Winter Nitro Championship race in Brandon FL.

Time to burn some NITRO BABY.........................

DSCN2942.JPG
 
Last edited by a moderator:
KA BOOM!!!!!!!!!!!!!!!!!!!!!!!!!!!

Got one run to try the new prop cut in open water.....................

Never made it to the water the second run.........................KLUNK.............

Well testing over for a few............NEXT.................

untitled.png
 
KA BOOM!!!!!!!!!!!!!!!!!!!!!!!!!!!

Got one run to try the new prop cut in open water.....................

Never made it to the water the second run.........................KLUNK.............

Well testing over for a few............NEXT.................
David

That must be your secret, an external port. Seriously, have Tom do his magic and weld that baby up and it should be good to go with a new rod.

Bill Hoch
 
In time I'll be back........need to get on the Vector. Play time is over for now.

Have found a weak spot again. Will have Scott make some new pistons so I can use the smaller VAC wrist pin and lighten the piston up some.

Asking a lot from that small rod...........................

Also a new boat.... This one is done.
 
David,

Just put that loaner engine in the boat and have a fun weekend.

A Good Friend at the pond today will hook you up. The Propeller came

out good. How did it run before you aerated the case?

Thanks,

Mark Sholund
 
Julian gave me a new RS1.01 and I put it in the boat. spent all day trying to hook it up. a 1.01 dose not have the grunt to run the props I have. could not get it going good. Takes time to prop this set up right.

I'm done for a wile need to move on for now..................................
 

Latest posts

Back
Top