1983 Miss Renault build

[Hydro Junkie]

Joey, any word on the cowl? I know you were waiting on it

 

[jojoinotown]

Still waiting.

 

[jojoinotown]

Any input on magnets for cowl? I'm looking for something strong enough to keep it in place. 20lbs strength or so is my guess?

 

[Wesleys Custom Graphics]

I found some at Ace Hardware for my Thunderboat. They are really strong.

 

[Lennard Cuenco]

home depot fastener section

 

[michael winter]

http://www.rare-earth-magnets.com/ This is where I get my magnets...........

 

[Don Ferrette]

Any input on magnets for cowl? I'm looking for something strong enough to keep it in place. 20lbs strength or so is my guess?

http://www.kjmagnetics.com/products.asp?cat=177

 

[jojoinotown]

Thanks guys. Huge help.

 

[Mike Betke]

Super magnets are sold at Home Depot. They are the rare earth type magnet and reasonably priced. I use them on all my scales to hold down the cowls.

 

[Blackout]

You can try your local hobby shop too. Mine has them.

 

[jojoinotown]

Picked up some at home depot. Thank you everyone for the advice.

 

[scottmeyers]

It's looking great Joey!

So I've looked in our home depot before and never saw any magnets that I liked. I don't know what you've found, but did you take a minute to check out the kj magnetics website that Don suggested? They've got super-sexy-super-strong round, square, rectangular, triangular, whatever kind you could ever want. Tapered mounting holes too so you can do some real slick mounting of them. I used the small rectangular ones on my Superior and Brandt's Bud and they work awesome.

Keep up the great work. I love that Renault!

 

[dschigoda]

Making a a little more headway.

I like it! For the "lettering", are those decales? Or are they sketches or tracings made from the Newton drawings?

 

[dschigoda]

How are you planning to route your driveline? In "top view", offset to the left, parallel to the hull? Angled to the left? S curve or J curve to the left (top view) ? ...Or?

Thanks.

 

[jojoinotown]

Wesley's did the Graphics for me, Great work and very speedy delivery, Thank you again Wesley's custom graphics. As far as the drive line, yet to be determined. I keep changing things in my head, have not figured out if I'm going to drop the motor lower and cut a belly pan or not. Once that decision is made then the rest should fall right into place. Installed my magnets yesterday but not to happy with the strength. Will probably just end up using tape as a safety backup. I wanted to make sure it would be easy to apply tape if needed.

 

[jojoinotown]

I got tired of waiting for the cowl, not upset over it. Very happy will just use the new one for the backup when it comes. So that being said, Here is the latest.

 

[WikiWiki1]

OEM Code Color Valspar Code PPG Code DuPont Code RM Code SW Code MS Code Azko Code WA Code 06 Mahogany Metallic B418 2864 44131 - 25025 4554 GMA81:06 4759 10 Classic White W041 8631 5040 1802 2517 3627 GMA70:10 3465 13 Silver Metallic S028 2953 44716 8680 3782 4610 GMA77:13 4963 19 Black K090 9300 99 A946 1738 3069 GMA78:19 - 24 Bright Blue Metallic L990 3340 B8013 12205G 31034-G 4967 - 7270 28 Dark Blue Metallic L758 3074 45209 12206D 3913-G 4750 GMA81:28 7193 52 Yellow Y419 3236 B8054 11434V 30745 4902 GMA81:52 7196 59 Frost Beige B116 3087 45205 9380 3902 4731 GMA78:59 7084 75 Red R119 3332 B8115 12229V 31056-H 4989 GMA81:75 7211 79 Maroon Metallic R979 3341 B8126 12232V 31058-E 4991 GMA81:79 - 84 Charcoal Metallic N125 3223 B8012 11421 30473 4891 GMA80:84 7197 33 Silver Metallic S282 3402 B8262 - - - GMA81:33 7410 38 Dark Blue Metallic MW8101 3473 B8267 - 31824 - - 7496 39 Charcoal Metallic N527 3414 B8265 12661 31825 - GMA81:39 7420 50 Beige MW8102 3474 B8268 - 31826 - - 7498 74 Dark Beige MW8103 3446 B8264 - 31827 - - 7412 80 Claret Metallic MW8104 3445 B8263 - 31828 - - - 98 Dark Claret Metallic R797 3452 B8266 12695D 31829 - GMA82:99 7421

Corvette paint codes from 1981. There is no yellow for 82,83,or 84. To save some $$$ you might try to find a can of duplicolor in the correct yellow for a base

then spray the clear over that. I'm going that route on my next boat.

Brent

 

[WikiWiki1]

That format didn't work. Go here http://www.corvettepaintcodes.com/

 

[jojoinotown]

Thanks Brent.

 

[jojoinotown]

gettin closer.