WTB k&b outboard crank 7.5

[Dan Hutchinson]

i need a crank for a K&B 7.5 outboard it has to have the small crank pin . and be the short version in length .i know there are many variations of this part. but if anyone has one, email me and i will try to get some measurements or call me at home at 863 858 0536 whoops put this in the wrong category

 

[GARYERWINE]

DAN IS THIS THE EARLY MODEL CRANKS IF SO I HAVE 3 IF MY MEMORY IS CORRECT GET SOME NUMBERS AND A PIC THANKS GARY

 

[Dan Hutchinson]

o/k here is some pics with some measurements as close as i could get pin diameter is .218mm take a look at the pics and see what you have thats close

looks like 17 mm thick and 31.30 long

 

[Dyno]

o/k here is some pics with some measurements as close as i could get pin diameter is .218mm take a look at the pics and see what you have thats close

looks like 17 mm thick and 31.30 long

Part no. 17-8704

 

[Dan Hutchinson]

are you sure. i hate to buy the wrong one but if your 100% does anyone have a 17-8704 with pics or measurements to sell

 

[Dyno]

are you sure. i hate to buy the wrong one but if your 100% does anyone have a 17-8704 with pics or measurements to sell

Double check me .

http://www.mecoa.com/kb/87/870102-exp.pdf

 

[Dan Hutchinson]

yes that looks like it . do you have one and how much plus shipping ?

 

[Dyno]

yes that looks like it . do you have one and how much plus shipping ?

No, I don't have one, mine are all small diameter 15mm.

 

[Dan Hutchinson]

i still need a 17-8704 outboard crank. if anyone has one to sell new or used email me at [email protected].