what props for ul1?

[camaroboy383]

what are good props for the ul1?? for stock and 2s lipos??

 

[MarkTanski]

On the Offshore Electrics forum there is a bunch of threads about setup etc for the ul-1, everything you could possibly want is in there.

http://forums.offshoreelectrics.com/showthread.php?6249-Darin-s-UL1-Race-Prep

Darin Jordan is a well known racer/boat designer, this is his race prep on one.

Cheers

 

[camaroboy383]

thanks mark,,, and i actually ment to type 2s lipos

 

[wayne middlemiss]

octura x445 and the grim racer props would the props of choice.

i was using 2 hard case lipo's 5200 ma 7.4 v x445 = 45 mph -48 mph range .

it has suffered damage to rear right sponson actualy ripped the whole turn fin and mount from the boat after it blew over @ 48 mph.

all from stock equipment .

 

[camaroboy383]

good info thanks for posting,,,i picked up a new one from tower and grabbed a couple 2s 5000 20c-30c mah batts... now im just tryin to figure out what to spin on it.,... i want good speed but i for sure dont want to smoke anything...thanks again for posting fellas

alden

 

[BrianTooms]

I'm running the GR40 x 52 3 blade it seems to go pretty well and nothing has burned up. I keep my run time to about 4 minutes with 5000mah packs.

Do a pressure test on your watercooling to check for leaks.