WHAT PROP

[Bob Willner]

67-80 Cajun Bullit,1.00cube CMB.The current prop I am running is a Octura 1667 pitched up to 6.00 in. pitch.

The boat seems like it could handle more.Is this a good prop for this boat?or is there something else that would work better.

Thanks.

 

[shadow]

Try an H-50 octura! Works real well on my 1.01 Eagle.

Cliff

 

[Richard Dahlheimer]

Try an H-50 octura! Works real well on my 1.01 Eagle.Cliff

That would be H-50 ABC. Richard D

 

[Chris Wood]

or a octura h-667 or a 2170 possibly?

chris

 

[tnrcboatracer]

Have you tried an S40 ABC? The 67~80 CB may be light enough for it, and the 1.10 should have enough torque to pull it.

 

[Tom Foley]

67-80 Cajun Bullit,1.00cube CMB.The current prop I am running is a Octura 1667 pitched up to 6.00 in. pitch.The boat seems like it could handle more.Is this a good prop for this boat?or is there something else that would work better.

Thanks.

Add more pitch !! That motor will straighten the blades of an h-667 in a short period of time .

 

[shoboat]

Bob,

Try an ABC 2716 or 2814 for the 101,it should load that motor better.

Have Fun,

Mark Sholund

 

[Bob Willner]

Thanks for the replies.I may get an h50 and try it.BTW how much pitch should I put into the 1667?

Thanks,

Bob

 

[shoboat]

Bob,

A 1667 only has 4.2" of pitch in the center of the blade. Try the H-50@ 5.00" of pitch,

[email protected]" of pitch,or the [email protected]" pitch but more blade area. It is actual pitch

and RPM that makes you go faster, not aways more cup on the trailing edge.

Your 1667 has 6.00" of cup on the trailing edge @ .7 radi correct?

Enjoy Testing,

Mark Sholund