Terry Heddin
Well-Known Member
- Joined
- Nov 19, 2023
- Messages
- 84
A couple of posters suggested that my fins and wing were too solid, and could be an issue in a blow over.
I have re-engineered the mount system so it all 6-32 nylon bolts and hardware. I cut the mount tubes short enough, so they only locate the fins. I also made a threaded plate for the strut and rudder brackets.
I have re-engineered the mount system so it all 6-32 nylon bolts and hardware. I cut the mount tubes short enough, so they only locate the fins. I also made a threaded plate for the strut and rudder brackets.
Attachments
-
20240114_134232.jpg230.1 KB · Views: 0
-
20240115_134629.jpg280.3 KB · Views: 1
-
20240115_133321.jpg289.4 KB · Views: 1
-
20240115_133312.jpg359.9 KB · Views: 1
-
20240115_133303.jpg382.1 KB · Views: 0
-
20240115_132308.jpg900.4 KB · Views: 0
-
20240115_131931.jpg902.7 KB · Views: 0
-
20240114_134254.jpg349 KB · Views: 0
-
20240114_134243.jpg332.8 KB · Views: 0
-
20240114_134228.jpg221.3 KB · Views: 1