THOR - FLAT BUILD / CORELOCK

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
If thats the OSZPEC Keep, then LOOKOUT...you will need more cup in that prop Ron
default_wink.png
 
That KEEP is going in the SAW tunnel. Kentley is breaking it in as we speak. Stay tuned........
default_smile.png
 
Y'all got the jump on me this year. Prove its bonafide, and my build begins after Chuckytown.

Then COME GETCHA SOME.......

Doctors saved me, but they left my evil genius.

Carl gets my order tomorrow.

My surgery tentatively scheduled while you are starting April 29.

Miss all, ready to get the Hell on with my life ...

BEST WISHES TEAM THOR,and to all, KICK BUTT...

Premo
 
I saw the Ozspec keep run twice. Once it was still on the Vision, second time on a Thor at the ODMBA race last season (IF that was what was on the Thor) & now KP has it.....gonna be even more ballistic, I betcha (-;
 
Last edited by a moderator:
Does Kentley run anything he has paid for?
default_wink.png


Going to be a good show of hull designs at the up coming WTC, cannot wait to see who finishes on top with what boat.
 
Does Kentley run anything he has paid for?
default_wink.png


Going to be a good show of hull designs at the up coming WTC, cannot wait to see who finishes on top with what boat.
Kentley is a team driver like Aaron. With 25 plus records under his belt, he is a guy you want in your camp Kris. BTW, there was a boater in another outboard thread looking for longer 3.5 flex cables. Can you help him out? Thanks.
 
I saw the Ozspec keep run twice. Once it was still on the Vision, second time on a Thor at the ODMBA race last season (IF that was what was on the Thor) & now KP has it.....gonna be even more ballistic, I betcha (-;
Yep Robin, another engine just like that one....
default_wink.png
 
Ron I posted on another thread but want to find out what will be involved putting a NR .21 on a K&B lower if that's even possible. I have lowers for both the .21 and the .45 and would like to put them to use. Thanks.

Rick H.
 
Ron I posted on another thread but want to find out what will be involved putting a NR .21 on a K&B lower if that's even possible. I have lowers for both the .21 and the .45 and would like to put them to use. Thanks.

Rick H.
k
Rick,

Fred at lawless conversion. Plates available. My lawless was kb, but adapted over to the os, all bolt up. Just tell him what you have. Go to mfg section for Lawless,

Old NR. bolts up, keep takes a conversion...

RP
 
Last edited by a moderator:
Ron I posted on another thread but want to find out what will be involved putting a NR .21 on a K&B lower if that's even possible. I have lowers for both the .21 and the .45 and would like to put them to use. Thanks.

Rick H.
Contact Fred at Lawless, mfg.section.Tell him your needs, he can make it happen.

RP
 
Does Kentley run anything he has paid for?
default_wink.png


Going to be a good show of hull designs at the up coming WTC, cannot wait to see who finishes on top with what boat.
Kentley is a team driver like Aaron. With 25 plus records under his belt, he is a guy you want in your camp Kris. BTW, there was a boater in another outboard thread looking for longer 3.5 flex cables. Can you help him out? Thanks.
no I did not see that...still cant :-(

Must be going blind from all the dust
 
Does Kentley run anything he has paid for?
default_wink.png


Going to be a good show of hull designs at the up coming WTC, cannot wait to see who finishes on top with what boat.
Kentley is a team driver like Aaron. With 25 plus records under his belt, he is a guy you want in your camp Kris. BTW, there was a boater in another outboard thread looking for longer 3.5 flex cables. Can you help him out? Thanks.
no I did not see that...still cant :-(Must be going blind from all the dust
Lol
 
Back
Top