Don Templeton
Well-Known Member
- Joined
- May 13, 2002
- Messages
- 1,155
OK-I'm ready to position my electronics and could use some
help on weight distribution.
With the boat ready to run (less fuel), I would assume that the
CG is the point where the boat picks up level. If this is the case,
where would you locate the leading edge, ( or center if you prefer),
of the turn fin in relationship to the CG?
This is a 24"-.12 rigger-Distance from trailing edge of front sponsens
to center line of prop is 15 1/8"
Thanks again for all the previous help. I'm finally getting there!
Don
help on weight distribution.
With the boat ready to run (less fuel), I would assume that the
CG is the point where the boat picks up level. If this is the case,
where would you locate the leading edge, ( or center if you prefer),
of the turn fin in relationship to the CG?
This is a 24"-.12 rigger-Distance from trailing edge of front sponsens
to center line of prop is 15 1/8"
Thanks again for all the previous help. I'm finally getting there!
Don