speedmaster hardware

Discussion in 'Other' started by Chris Wood, Dec 16, 2010.

intlwaters.com

Help Support intlwaters.com:

  1. Dec 16, 2010 #1

    Chris Wood

    Chris Wood

    Chris Wood

    Moderator Moderator

    Joined:
    Jan 4, 2002
    Messages:
    3,394
    Location:
    Ankeny, IA
  2. Dec 19, 2012 #2

    Steve Seebold

    Steve Seebold

    Steve Seebold

    Well-Known Member

    Joined:
    Sep 30, 2005
    Messages:
    887
    Location:
    Laguna Niguel, Ca
  3. Dec 19, 2012 #3

    Tim Kish

    Tim Kish

    Tim Kish

    Well-Known Member

    Joined:
    Jul 7, 2003
    Messages:
    2,200
    Location:
    Stoney Creek Ontario Canada
    Really ????.
     
  4. Dec 19, 2012 #4

    FloridaScaleBoater

    FloridaScaleBoater

    FloridaScaleBoater

    Well-Known Member

    Joined:
    Oct 2, 2005
    Messages:
    5,772
    Location:
    Gainesville, Georgia
    Steve, you really aren't very tactful in the way you post about others "wares"

    Speedmaster has been supplying quality products and quality service for MANY years.

    I WAS going to contact you for a one off project,,, But I think I'll pass on that now

    Good luck with your endeavors...
     
  5. Dec 19, 2012 #5

    RodneyPierce

    RodneyPierce

    RodneyPierce

    Well-Known Member

    Joined:
    Mar 26, 2006
    Messages:
    4,462
    Location:
    Cedar Rapids, IA
    Your insane. Now wonder there isnt many people willing to buy your stuff. Speedmaster is the best hardware I have ever used. The numbers speak for themselves......
     
    Last edited by a moderator: Dec 19, 2012
  6. Dec 19, 2012 #6

    Joe Warren

    Joe Warren

    Joe Warren

    Well-Known Member

    Joined:
    Nov 29, 2003
    Messages:
    7,743
    Location:
    Collierville TN
    Speedmaster Hardware (Ross & Harry) and Acccutech Hardware (James trout) is the 2 leading suppliers for Hardware in R/C MARINE. If you buy a Seaducer MONO or CAT? Seaducer Hardware fits their boats the best. If it is too bulky for you? It can always be custom trimmed or blended after you receive it. Speedmaster Hardware product line is as Large as it has ever been.... Covering many different boat types.
     
    Last edited by a moderator: Dec 19, 2012
  7. Dec 19, 2012 #7

    Scott Miller

    Scott Miller

    Scott Miller

    Well-Known Member

    Joined:
    Oct 2, 2011
    Messages:
    707
    Location:
    Charleston South Carolina
    Almost all of my boats have speedmaster hardware (partial or full) with the exception of my Seaducer. Good quality hardware IMO and great service. The only complaint I have ever heard is that some us wish they offered the rudder blades with the water pickup on the right side of the blade ISO the left.
     
  8. Dec 19, 2012 #8

    julianconde

    julianconde

    julianconde

    Well-Known Member

    Joined:
    Jan 23, 2009
    Messages:
    5,237
    Location:
    Orlando Florida
    why dont you offer your hardware to some boaters so we can see how good your harware is ????????????????????????

    I have a Twin hydro thats in the need of hardware ????????
     
    Last edited by a moderator: Dec 19, 2012
  9. Dec 19, 2012 #9

    timothy johnson

    timothy johnson

    timothy johnson

    Well-Known Member

    Joined:
    Jul 9, 2011
    Messages:
    1,004
    Location:
    Anchorage, Alaska
    Scott I have a 60 size with the pick-up on the right and I had problems getting water, I changed blades and fixed the problem. It also depends which side of the boat the rudder is on. Tim
     
  10. Dec 19, 2012 #10

    RobertWurster

    RobertWurster

    RobertWurster

    Well-Known Member

    Joined:
    Apr 13, 2009
    Messages:
    698
    I really like there sp 20 mount,
     
  11. Dec 19, 2012 #11

    SayMikey

    SayMikey

    SayMikey

    Well-Known Member

    Joined:
    Feb 23, 2003
    Messages:
    10,872
    Location:
    Evansville Indiana
    OPEN mouth insert foot
     
  12. Dec 20, 2012 #12

    dave roach

    dave roach

    dave roach

    Well-Known Member

    Joined:
    May 28, 2004
    Messages:
    3,736
    Location:
    Dayton,Ohio
    WOW

    What a statement.JUNK

    Dave
     
  13. Dec 20, 2012 #13

    Steve Seebold

    Steve Seebold

    Steve Seebold

    Well-Known Member

    Joined:
    Sep 30, 2005
    Messages:
    887
    Location:
    Laguna Niguel, Ca
    OK, junk is a harsh word. I make hardware too. I just don't make as much as Speedmaster. I make stuff for people who tell me Speedmaster stuff is too flexible for their application. AND my prices are higher than Speedmaster.

    I just took a look at the Accutech Hardware site, and it's the same stuff as Speedmaster.

    Does no one have originality any more? Or does everyone think the same way? Oh, it works for this guy, so let's just make an exact copy and maybe cut his price a little.

    I tell everyone, I refuse to compromise on quality and I will not lower my price. If I am told "oh, I can get it over here for less, I tell them that's the place to go.

    I have had people replace Speedmaster with my stuff. Do you know what they do then? They reorder.

    My signature line on other bulletin boards is "YOU CAN BUY GOOD PARTS OR YOU CAN BUY CHEAP PARTS, BUT YOU CAN'T BUY GOOD CHEAP PARTS".

    I have seen others that say "you can have them good, cheap or fast. Pick two."

    I am making some stuff for a gentleman who told me Speedmaster stuff is flexible so I bought a piece to see what he was talking about. NOW I see why he says it's flexible.

    I realize their 3 piece rudder assemblies allow for a one size fits all base, but what's wrong with a little modernization.

    Yes, they do make hardware for ALL types of boats whether it be electric, gas or nitro. At this point in time, I don't and honestly, I'm not sure I want to.

    Brass bushings? Give me a break. How many times during a season or year do you have to replace them?

    Tactfulness! GeorgiaScaleBoater, you're absolutely right. I call it like I see it, and I would expect none the less if I made an inferior product. Will Speedmaster make a one off part for you? I will. As I said in an earlier post, a one off will probably cost you a little more, but how many hardware manufacturers will do a one off. Most guys with CNC's want to set their machine up and let it run all week and hire a monkey to push the green button. I don't like making more than about 25 pieces.

    I have a couple of jobs on the bench right now that are 60 pieces each and I am really starting to get bored.

    RodneyPierce, Speedmaster hardware is the best you have EVER used, because you have never used mine.

    Does Speedmaster put a warrantee on their product against defective workmanship or material? I do. My warrantee says "IF MY PRODUCT FAILS, DUE TO DEFECTIVE WORKMANSHIP OR MATERIAL, I WILL REPLACE IT OR REFUND YOUR MONEY, "YOUR CHOICE". The only thing I don't warrantee is the lead teflon bushings and I won't use brass.
     
  14. Dec 20, 2012 #14

    SayMikey

    SayMikey

    SayMikey

    Well-Known Member

    Joined:
    Feb 23, 2003
    Messages:
    10,872
    Location:
    Evansville Indiana
    Steve a picture is worth a thousand words....Show me the money? Im looking for a good quality 20 hydro rudder got any?
     
  15. Dec 20, 2012 #15

    Kevin Krogness

    Kevin Krogness

    Kevin Krogness

    Well-Known Member

    Joined:
    Jun 6, 2008
    Messages:
    2,585
    Location:
    North Branch, MN
    How about you start a thread in the general forum and show us this God given talent you have and your product line... I was going to adk you about a balancer but after your junk coment I don't think so. Speedmaster is great to work with. Wish I could have said the same to you....
     
  16. Dec 20, 2012 #16

    Steve Seebold

    Steve Seebold

    Steve Seebold

    Well-Known Member

    Joined:
    Sep 30, 2005
    Messages:
    887
    Location:
    Laguna Niguel, Ca
    Let me know what you need and I'll be happy to put my parts where my keyboard is. Do you run collet or square drive? Honestly, I have never done anything for a collet drive. I'm not saying I can't, I just never have. Just to prove my point, tell me what you need and I'll make it and send it to you. If you like it and you install it and run it, you can critique it here on Intlwaters and pay me for it. If you don't like it, tell me what you don't like and I'll either fix it or you just can send it back. I'll even include a shipping label.

    My phone number is 714-420-2453 if you want to talk about it.
     
    Last edited by a moderator: Dec 20, 2012
  17. Dec 20, 2012 #17

    Steve Seebold

    Steve Seebold

    Steve Seebold

    Well-Known Member

    Joined:
    Sep 30, 2005
    Messages:
    887
    Location:
    Laguna Niguel, Ca
    I'm not saying they are not great people to work with, I just think they sell an inferior product.

    You have never had the opportunity to work with me, so how do you know you can't say the same for me.
     
    Last edited by a moderator: Dec 20, 2012
  18. Dec 20, 2012 #18

    Steve Seebold

    Steve Seebold

    Steve Seebold

    Well-Known Member

    Joined:
    Sep 30, 2005
    Messages:
    887
    Location:
    Laguna Niguel, Ca
    I will post some pictures of some of my stuff after the New Year. I am officially shut down until January 7, 2013.
     
  19. Dec 20, 2012 #19

    Kevin Krogness

    Kevin Krogness

    Kevin Krogness

    Well-Known Member

    Joined:
    Jun 6, 2008
    Messages:
    2,585
    Location:
    North Branch, MN
    You are right, I never have and never will as well as others that see this little junk deal........ Not a good business plan on your part...
     
  20. Dec 20, 2012 #20

    Kevin Krogness

    Kevin Krogness

    Kevin Krogness

    Well-Known Member

    Joined:
    Jun 6, 2008
    Messages:
    2,585
    Location:
    North Branch, MN
    Feel free to bash everyones products until then.... Cause once we see your stuff we will forget about the others we have gone to for years...
     

Share This Page



arrow_white