propshaft setting on xtr21

[mark james]

hey guys.

Iam setting up a xtr21 with a lawless outdrive.

Can anyone help me out with setting the propshaft depth with this setup ??

Also ,any prop suggestions would be vary helpfull!

thanks mark

 

[lohring]

I'm not sure about the Lawless lower unit, but at the sponson bottom to 3/16 above works very well for a K&B. My shaft is 1/8" above the sponson bottom with the CG 7 3/4" from the back. I am running a cupped 1440 prop with the trailing edge cut back 15 degrees. Pictures on measuring prop depth and angle are available on WWW.BandMLeecraft.com

Lohring Miller

 

[mark james]

thanks for the info on b&m site i will check it out.

I was running a k&b foot on it ,but just want to try something different.

thanks again mark