Dr Hydro Well-Known Member Joined Sep 9, 2005 Messages 411 Feb 26, 2010 #1 I have a friend that put an old stock gold head CMB 90 in a rigger and was wondering what prop he should use. He is using an OPS nitro pipe. Any reccomendations on pipe length? Thanks in advance for any suggestions!! Jim Fullmer
I have a friend that put an old stock gold head CMB 90 in a rigger and was wondering what prop he should use. He is using an OPS nitro pipe. Any reccomendations on pipe length? Thanks in advance for any suggestions!! Jim Fullmer
ALLAN YUEN Well-Known Member Joined Jan 14, 2005 Messages 6,429 Feb 26, 2010 #2 Set up 12.5" pipe length and use 1667 cup 5.8" Good luck!
H HendricX Well-Known Member Joined Jan 11, 2002 Messages 427 Feb 27, 2010 #3 Octura Y567 will do too ... eBay-link
Bob Morton Well-Known Member Joined Nov 30, 2002 Messages 1,726 Feb 27, 2010 #4 Pipe at 12" and a H-50 Very good set up