• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

motors and parts for sale ( AUSTRALIAN DOLLARS) ALL SOLD THANKS EVERYONE

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

picco lover

Well-Known Member
Joined
Oct 13, 2008
Messages
201
Hi everyone

here is a list of some stuff i do not need anymore as i have to many boats and parts so i need to let them go

i will not be running 67's anymore and i will be running picco 45's and 21's as well

so if you like anything just email me at [email protected]

i take paypal only for people that are NOT in Australia.... account is [email protected] ( same as my email )

thanks for looking

neal rogers

ps if you need pics of anything i can email them to you

i have done my best to tell you all what condition everything is

THIS LIST IS ALSO ON

* AMPBA FORUM (Australian)

ALL TAKEN OFF FOR SALE PLEASE LOOK AT EBAY TO FIND SOME OF THE ITEMS LEFT THANKS NEAL

SHIPPING NOT INCLUDED

ALL PRICES ARE IN AUSTRALIAN DOLLARS

1 X USED PICCO 67 EXR EXHAUST HEADER ( VERY SHORT BEEN CUT DOWN) $5

1 X SMALL BAG OF BOLTS FOR PICCO 67 EXR $10

2 X MAC 84 PISTONS ( NOT VERY GOOD CONDITION) $20

1 X NITRO PIPE NEW NEVER USED FOR A 67 $40

1 X NITRO PIPE USED NEEDS A GOOD CLEAN OK CONDITION FOR A 67 $20

1 X NEW TURN FIN FOR A 67 HYDRO OUTRIGGER (TIDEWATER) $20

1 X RUDDER AND BRACKET USED NOT TO GOOD $15

1 X ANDY BROWN STRUT USED FOR 1/4 INCH SHAFT OK CONDITION $25

1 X MISCELLANEOUS STRUT FOR 1/4 SHAFT VERY RUFF CONDITION $10

1 X MISCELLANEOUS STRUT FOR 3/16 SHAFT GOOD CONDITION $10

1 X NEW W.S DEANS ANTENNA FOR 27MHZ $10

1 X USED (AS NEW )1/4 INCH SHAFT STEPPED DOWN TO 3/16 TOTAL LENGHT 535MM LONG $25

1 X NEW 1/4 INCH SHAFT STEPPED DOWN TO 3/16 TOTAL LENGHT 820MM $35

1 X NEW OCTURA FLEX HEX FOR 1/4 INCH SHAFT $15

1 X USED ( AS NEW ) OCTURA FLEX HEX FOR 1/4 INCH SHAFT $10

2 X NEW SULLIVAN FUEL TANKS 4 OUNCES $5
 
Last edited by a moderator:
Neal,

I would like the best condition MAC 84 sleeve for $65 AU. Let me know how much it is in US and how much to ship ( to USA) and I'll shoot the money by Paypal.

John
 
Last edited by a moderator:
Ill take the average mac 84 liner.

need a total shipped to 89103 las vegas nevada
 
I will take both of these if the header is a 10 degree hydro angle-

1 X MAC 84 HEADER ( VERY GOOD CONDITION ) ( NOT CUT ) $25

1 X USED MAC 84 HEAD BUTTON ( GREAT CONDITION) $10

Let me know total with shipping to Virginia 23111
 
Last edited by a moderator:
Ill take the average mac 84 liner.

need a total shipped to 89103 las vegas nevada
Total to ship to 89103 Las Vegas Nevada

is $ 25 +$ 9 shipping for a total $34.00 Australian dollars

paypal thanks

please send me your full address thanks mate
 
I will take both of these if the header is a 10 degree hydro angle-

1 X MAC 84 HEADER ( VERY GOOD CONDITION ) ( NOT CUT ) $25

1 X USED MAC 84 HEAD BUTTON ( GREAT CONDITION) $10

Let me know total with shipping to Virginia 23111
Hi Don Yes It is The 10 Degree Header

but the mac head button has been sold

sorry

total for header $25 and shipping is $9 for a grand total of $ 34 Australian dollars please pm me the full address to send to thanks neal
 
I will take both of these if the header is a 10 degree hydro angle-

1 X MAC 84 HEADER ( VERY GOOD CONDITION ) ( NOT CUT ) $25

1 X USED MAC 84 HEAD BUTTON ( GREAT CONDITION) $10

Let me know total with shipping to Virginia 23111
Hi Don Yes It is The 10 Degree Header

but the mac head button has been sold

sorry

total for header $25 and shipping is $9 for a grand total of $ 34 Australian dollars please pm me the full address to send to thanks neal
Well I hope Walt got it as I was trying to snag it for him anyways and save him the shipping cost (I have other stuff to send him). I'll send payment shortly, shipping info will be with it. B)
 
I will take both of these if the header is a 10 degree hydro angle-

1 X MAC 84 HEADER ( VERY GOOD CONDITION ) ( NOT CUT ) $25

1 X USED MAC 84 HEAD BUTTON ( GREAT CONDITION) $10

Let me know total with shipping to Virginia 23111
Hi Don Yes It is The 10 Degree Header

but the mac head button has been sold

sorry

total for header $25 and shipping is $9 for a grand total of $ 34 Australian dollars please pm me the full address to send to thanks neal
Well I hope Walt got it as I was trying to snag it for him anyways and save him the shipping cost (I have other stuff to send him). I'll send payment shortly, shipping info will be with it. B)
thanks Don

got payment and address

will send tomorrow

thanks again

neal rogers
 
Hi Everyone i think i replied to all but i need to go to bed now as it is 12.30am here and i have some items to ship

so i will check in about 4 hours time as that is when i get up so i will answer any more Q then thanks ( first in gets it ) :D
 
Hi Everyone i think i replied to all but i need to go to bed now as it is 12.30am here and i have some items to ship

so i will check in about 4 hours time as that is when i get up so i will answer any more Q then thanks ( first in gets it ) :D
Thanks, i will buy 2x 67 exr exhaust seals 10.00 and 2x 67exr wrist pin clips 5.00

ill pay pal [email protected]
 
Hi Everyone i think i replied to all but i need to go to bed now as it is 12.30am here and i have some items to ship

so i will check in about 4 hours time as that is when i get up so i will answer any more Q then thanks ( first in gets it ) :D
Thanks, i will buy 2x 67 exr exhaust seals 10.00 and 2x 67exr wrist pin clips 5.00

ill pay pal [email protected]
hi there if you are in USA the shipping cost will be $9 AU so the total will be

$24 AU thanks

can you please send me the address to send to thanks neal rogers
 
Hi everyone

ok now the people that have taken up a item ( sold and pending funds )all ok your parts are ready to ship

everything else will now go on ebay AU..... so please do not ask for anymore parts as i will be placing them on ebay tonight

those that have asked for parts And have payed for your items.... will be shipped monday morning and for those that iam waiting payment those items are just on hold and ready to ship when payment is made thanks neal rogers

thanks again everyone
 
Hi everyone

here is a list of some stuff i do not need anymore as i have to many boats and parts so i need to let them go

i will not be running 67's anymore and i will be running picco 45's and 21's as well

so if you like anything just email me at [email protected]

i take paypal only for people that are NOT in Australia.... account is [email protected] ( same as my email )

thanks for looking

neal rogers

ps if you need pics of anything i can email them to you

i have done my best to tell you all what condition everything is

THIS LIST IS ALSO ON

* AMPBA FORUM (Australian)

SHIPPING NOT INCLUDED

ALL PRICES ARE IN AUSTRALIAN DOLLARS

1 X NEW PICCO 67 EXR DISK ( NEW NEVER MOUNTED OR SEEN FUEL) $400

1 X PICCO 67 EXR DISK ( AS NEW HAD 1.5 LT OF 50 % NITRO THOUGH NEEDS RUNNING IN MORE ) $350

1 X SPEEDMASTER MOTOR MOUNT DRILLED AND TAPED FOR PICCO 67 EXR (AS NEW) $45

2 X NEW HEAD BUTTONS FOR PICCO 67EXR $15

2 X NEW PICCO 67 EXR EXHAUST SILCONE SEALS $10

1 X USED PICCO 67 EXR EXHAUST HEADER ( VERY SHORT BEEN CUT DOWN) $5

1 X SMALL BAG OF BOLTS FOR PICCO 67 EXR $10

2 X SET OF WRIST PIN RETAINERS FOR PICCO 67 EXR $5

1 X USED EXHAUST SPRING $1

1 X MAC 84 LINER ( IN GREAT CONDITION ) $65 (SOLD PENDING FUNDS TO joseph puglia)

1 X MAC 84 LINER ( IN AVERAGE CONDITION) $25 (SOLD )

2 X MAC 84 PISTONS ( NOT VERY GOOD CONDITION) $20

1 X MAC 84 HEADER ( VERY GOOD CONDITION ) ( NOT CUT ) $25 ( SOLD TO DON )

1 X USED MAC 84 HEAD BUTTON ( GREAT CONDITION) $10 ( SOLD PENDING FUNDS NAME HELD)

1 X NITRO PIPE NEW NEVER USED FOR A 67 $40

1 X NITRO PIPE USED NEEDS A GOOD CLEAN OK CONDITION FOR A 67 $20

1 X NEW TURN FIN FOR A 67 HYDRO OUTRIGGER (TIDEWATER) $20

1 X RUDDER AND BRACKET USED NOT TO GOOD $15

1 X ANDY BROWN STRUT USED FOR 1/4 INCH SHAFT OK CONDITION $25

1 X MISCELLANEOUS STRUT FOR 1/4 SHAFT VERY RUFF CONDITION $10

1 X MISCELLANEOUS STRUT FOR 3/16 SHAFT GOOD CONDITION $10

4 X NEW MAC 84 HEAD SHIMS .02 THICKNESS $10

1 X NEW W.S DEANS ANTENNA FOR 27MHZ $10

1 X USED (AS NEW )1/4 INCH SHAFT STEPPED DOWN TO 3/16 TOTAL LENGHT 535MM LONG $25

1 X NEW 1/4 INCH SHAFT STEPPED DOWN TO 3/16 TOTAL LENGHT 820MM $35

1 X NEW OCTURA FLEX HEX FOR 1/4 INCH SHAFT $15

1 X USED ( AS NEW ) OCTURA FLEX HEX FOR 1/4 INCH SHAFT $10

2 X NEW SULLIVAN FUEL TANKS 4 OUNCES $5
How much for both 67 exr's
 
I will take both of these if the header is a 10 degree hydro angle-

1 X MAC 84 HEADER ( VERY GOOD CONDITION ) ( NOT CUT ) $25

1 X USED MAC 84 HEAD BUTTON ( GREAT CONDITION) $10

Let me know total with shipping to Virginia 23111
on it way (shipped)
 
Hi Everyone i think i replied to all but i need to go to bed now as it is 12.30am here and i have some items to ship

so i will check in about 4 hours time as that is when i get up so i will answer any more Q then thanks ( first in gets it ) :D
Thanks, i will buy 2x 67 exr exhaust seals 10.00 and 2x 67exr wrist pin clips 5.00

ill pay pal [email protected]
hi there if you are in USA the shipping cost will be $9 AU so the total will be

$24 AU thanks

can you please send me the address to send to thanks neal rogers
pay pal 24.00 made SORRY FOR DELAY JOE P. address PM 'ED
 

Latest posts

Back
Top