toyotatruckin
Well-Known Member
- Joined
- Jun 5, 2006
- Messages
- 1,068
sprint 3.5 wood version has been modified some from stock and is epoxy sealed-new VS-1 cowling fitted to the boat new durbro mount and a like new(bench ran once) K&B3.5ss with a S/B/P 440/2 prop
radio box has been cut down Length and hight some off the front angle---back channel has been gutted pink foam added and sheeted over angled down in the rear to allow for mounting bolt access total weight cowl/outboard/hull is 2lbs 14oz--steering servo mount is set-up and a servo will come with for steering--almost a straight shot for the steering linkage so rods or cable will be simple and will include push rod seals
315$ shipped in the lower 48 states with UPS insurance and tracking number included in the price-
would possibly seperate
engine 215$ includes new durbro mount and USPS Priority mail
hull 117$ includes UPS shipping with tracking number and insurance
all to the lower 48 states on the shipping
will ship to canada but at buyers risk due to customs prices are same but will add the difference in shipping to the above price--
leecraftSOLDNext is a freshly painted and fell from hanger leecraft 3.5 tunnel transom wood replaced with bland nuts epoxied in paint used is automotive base/clear and I have the nasons paint code for the yellow (backed with GM white) if buyer wants it or fix the chips and trim out in a different color --repairs (front sponson needs glassed on the tip and a couple chips in the paint) very very simple or glass over the sponson front 1/4" and run it as is with no problems comes with a P/B aluminum mount that matches the holes in the transom
make a reasonable offer possibly would swap it for parts I need (40 mono parts)
will post pictures after a bit and might add to the list dont know yet
radio box has been cut down Length and hight some off the front angle---back channel has been gutted pink foam added and sheeted over angled down in the rear to allow for mounting bolt access total weight cowl/outboard/hull is 2lbs 14oz--steering servo mount is set-up and a servo will come with for steering--almost a straight shot for the steering linkage so rods or cable will be simple and will include push rod seals
315$ shipped in the lower 48 states with UPS insurance and tracking number included in the price-
would possibly seperate
engine 215$ includes new durbro mount and USPS Priority mail
hull 117$ includes UPS shipping with tracking number and insurance
all to the lower 48 states on the shipping
will ship to canada but at buyers risk due to customs prices are same but will add the difference in shipping to the above price--
leecraftSOLDNext is a freshly painted and fell from hanger leecraft 3.5 tunnel transom wood replaced with bland nuts epoxied in paint used is automotive base/clear and I have the nasons paint code for the yellow (backed with GM white) if buyer wants it or fix the chips and trim out in a different color --repairs (front sponson needs glassed on the tip and a couple chips in the paint) very very simple or glass over the sponson front 1/4" and run it as is with no problems comes with a P/B aluminum mount that matches the holes in the transom
make a reasonable offer possibly would swap it for parts I need (40 mono parts)
will post pictures after a bit and might add to the list dont know yet
Last edited by a moderator:
