M mark james Guest Jul 14, 2003 #1 when taking the measurement for the c/g (33%). is that measured from the rear of the itself or from the back edge of the overhang ?? thanks mark
when taking the measurement for the c/g (33%). is that measured from the rear of the itself or from the back edge of the overhang ?? thanks mark
Jerry Dunlap Well-Known Member Supporting Member Joined Apr 1, 2002 Messages 4,078 Jul 15, 2003 #2 You know, I never thought about the 1/8" over hang on the sponson bottoms when measuring for the CG. But, + or - 1/8" in a 9" measurement isn't going to make that much difference when establishing the CG. At least, I don't think it would. Jerry D.
You know, I never thought about the 1/8" over hang on the sponson bottoms when measuring for the CG. But, + or - 1/8" in a 9" measurement isn't going to make that much difference when establishing the CG. At least, I don't think it would. Jerry D.
J Jeff Torgalski Well-Known Member Joined Dec 9, 2002 Messages 231 Jul 15, 2003 #3 I asked that Grimracer guy the same question and he told me to measure from the sponson former, and ignore the overhang.
I asked that Grimracer guy the same question and he told me to measure from the sponson former, and ignore the overhang.
M mark james Guest Jul 15, 2003 #4 jeff and jerry, I guess the 1/8 overhang is not a big deal. but,if the boat likes a c/g of 33% without weights than I guess we need to know where to measuse from. thanks for your input!! respectfully mark
jeff and jerry, I guess the 1/8 overhang is not a big deal. but,if the boat likes a c/g of 33% without weights than I guess we need to know where to measuse from. thanks for your input!! respectfully mark