K.R.Joye
Well-Known Member
- Joined
- Feb 20, 2003
- Messages
- 593
`MACH 5 racing' HARDWARE and MOTORs
Check out our NAMBA race proven `MACH 5 racing' Inline Offshore hardware and motors for fast electric boats. Great quality stuff at prices the competition can't touch! We race what we sell. PAY PAL now accepted.
The `MACH 5 racing' 800 GRX motors for 18-20 cell applications are the the hot setup for Offshore enduros. Heres more on the 800GRX!
These motors are 90mm long (w/o shaft), 49mm in diameter, weigh 19 ounces and have a 6mm shaft. They have a very efficient built-in cooling fan. The fan works so well that external water cooling is not necessary.
Heres the details i have 800GRX motor
1) Replacable hard serrated brushes (not water soluable)
2) Bearing at shaft end, Oillite bushing at other(same as SS1)
3) Alloy end bells are crimped to a rolled steel cylinder can
4) 6mm hardened shaft, balanced epoxy coated arm, HD comm
5) Neo heat resistant magnets (similiar to SS1)
6) No torque ring for higher RPM
7) simple 2 bolt mounting pattern
has run successfully on 18-20 cells NAMBA enduros and sprints
9) made in Germany for U.S. supplier
10) adapted for R/C by MACH 5 racing
11) comes with 12 ga leads, and shotky installed
12) Available thru MACH 5 racing $75.00 plus shipping
*additional cost options include: 6mm to .130 couplers, universal aluminum mounting plates and replacement brush sets (all in stock. See pic
__________________
Mach 5 Racing Hardware & Motors
http://www.mmeu.com/members/joye/joye.htm
Check out our NAMBA race proven `MACH 5 racing' Inline Offshore hardware and motors for fast electric boats. Great quality stuff at prices the competition can't touch! We race what we sell. PAY PAL now accepted.
The `MACH 5 racing' 800 GRX motors for 18-20 cell applications are the the hot setup for Offshore enduros. Heres more on the 800GRX!
These motors are 90mm long (w/o shaft), 49mm in diameter, weigh 19 ounces and have a 6mm shaft. They have a very efficient built-in cooling fan. The fan works so well that external water cooling is not necessary.
Heres the details i have 800GRX motor
1) Replacable hard serrated brushes (not water soluable)
2) Bearing at shaft end, Oillite bushing at other(same as SS1)
3) Alloy end bells are crimped to a rolled steel cylinder can
4) 6mm hardened shaft, balanced epoxy coated arm, HD comm
5) Neo heat resistant magnets (similiar to SS1)
6) No torque ring for higher RPM
7) simple 2 bolt mounting pattern
has run successfully on 18-20 cells NAMBA enduros and sprints
9) made in Germany for U.S. supplier
10) adapted for R/C by MACH 5 racing
11) comes with 12 ga leads, and shotky installed
12) Available thru MACH 5 racing $75.00 plus shipping
*additional cost options include: 6mm to .130 couplers, universal aluminum mounting plates and replacement brush sets (all in stock. See pic
__________________
Mach 5 Racing Hardware & Motors
http://www.mmeu.com/members/joye/joye.htm