G Gary Murcott Guest Oct 16, 2012 #1 I have a new gen 4 flow meter from Boris I am running a Mac 45 with a os needle and would like to know the starting point to set it at Thanks Gary
I have a new gen 4 flow meter from Boris I am running a Mac 45 with a os needle and would like to know the starting point to set it at Thanks Gary
JeremyEdge Well-Known Member Joined Jun 16, 2009 Messages 1,955 Oct 16, 2012 #2 Just start the engine as rich as possible and as soon as it starts, begine to lean it down from there. once the boat runs good then take the reading with the BM anf use that number as your starting point.
Just start the engine as rich as possible and as soon as it starts, begine to lean it down from there. once the boat runs good then take the reading with the BM anf use that number as your starting point.
Ray Sametz Well-Known Member Supporting Member Joined Nov 22, 2003 Messages 7,159 Oct 16, 2012 #4 Should blow somewhere around 60 or lower................==={} B)
G Gary Murcott Guest Oct 16, 2012 #5 Thanks that is the # I had in mind just needed to confirm it Gary