Do you sharpen the bottom of the lower unit like the bottom of a turn fin or leave it square like the back of a rudder? Do you round the bottom front corner like on a rudder or leave it square-edged? I've already got the leading edge razor sharp but these other aspects have me wondering. BTW....K&B .67 O/B
Lower unit sharpening.
- Thread starter Atious
- Start date
Help Support Intlwaters:
- Joined
- Apr 1, 2002
- Messages
- 4,071
Atious,
You've probably done plenty to the lower unit skeg by sharpening the leading edge. That's basically all I ever do - if that!! If you really enjoy working with metal, the skeg could be feathered at the trailing edge. But, I'm not sure there's any performance gains for all that work.
Jerry D.
You've probably done plenty to the lower unit skeg by sharpening the leading edge. That's basically all I ever do - if that!! If you really enjoy working with metal, the skeg could be feathered at the trailing edge. But, I'm not sure there's any performance gains for all that work.
Jerry D.
Similar threads
