JAE Sponsons

[Samuel Hagan JR]

I'm pretty sure I screwed up sheeting the bottom sponsons but does anyone have a picture of what there suppose to look like before I order a new set.

 

[Blackout]

My gas JAE sponson during construction, same as my JAE 21 and 45. What do you think you did wrong?

 

[Samuel Hagan JR]

Yep. That's what I thought. I did them wrong.Thanks.

 

[Samuel Hagan JR]

The over hang on the bottom. How important is that.

 

[KenOlvis]

Just add a 1/8 triangle piece of bass wood to the back edge flush to ride surface.

 

[Blackout]

The over hang on the bottom. How important is that.

The front bottom or back bottom?

The front bottom would be more important as that is a riding surface at full plane. The back over hang would not be needed. It would mostly just help at launch to get on plane.

 

[Samuel Hagan JR]

Just add a 1/8 triangle piece of bass wood to the back edge flush to ride surface.

That is a good idea.

 

[Samuel Hagan JR]

The over hang on the bottom. How important is that.

The front bottom or back bottom?
The front bottom would be more important as that is a riding surface at full plane. The back over hang would not be needed. It would mostly just help at launch to get on plane.

Front plane.

 

[Kevin Krogness]

If you have a strong motor to get you on plane it shouldn't be too big of a deal. As long as you have a 90° angle.

 

[Mike Hughes]

Just fix them is always an easy solution with wood. No need to throw them away.

 

[Samuel Hagan JR]

If you have a strong motor to get you on plane it shouldn't be too big of a deal. As long as you have a 90° angle.

It's the JAE Twin 45

 

[LarryBeals]

Add a G 10 cap will give sharp clean off