I Waters Rocket Club

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Scratch built- AGM Pike 33 - Drew style -
default_wink.png


rj1rgz.jpg
Grim what are your thoughts on making it seperate just aft of the "warhead loaded " decal vs nosecone ??

Im about to finish out recovery so neither section is joined yet .
 
Both are OK.. IF you can keep it up higher so you blow everything out. I would go out the nose cone

Grim
 
Fly my old trusty Argent on that F60 RoadRunner you gave me- Perfect flight
default_cool.png
default_cool.png
, then had an issue with a Cato on my Nike Smoke with an F50 - SADLY the motor tube is too damaged to fly again.
default_sleep.png


Only got one flight on that rocket , waiting to hear back from Estes as I filed a claim. It didnt hurt the exterior of the rocket at all- so at least it will look cool sitting on the shelf.

21ooa3c.jpg


2z4xu7n.jpg


ek52c3.jpg
 
Last edited by a moderator:
Well at least Estes cust service is right on time once again replacement PSII Nike Smoke otw as well as another F50-6 ,

Thanks Christine , you are the best when we have an issue beyond doubt
default_cool.png
 
This thread needed the dust kicked off it for good measure :p
Soooo - Got my L-1 at the last launch after never finding my first attempt the month earlier, a 38mm PML Callisto that caught a thermal on the chute and drifted out of sight. It will turn up one of these days , but it sucked loosing a rocket I had so much time in.
Needless to say, after getting my L-1 I started building my L-2 rocket,
a MadCow 4in Rogue - all fiberglass 54mm . :cool:
 

Attachments

  • 20190223_112226.jpg
    20190223_112226.jpg
    2.3 MB · Views: 16
  • 20190316_111420 (1).jpg
    20190316_111420 (1).jpg
    2 MB · Views: 16
  • 20190321_192343.jpg
    20190321_192343.jpg
    1.8 MB · Views: 16
Good stuff in the mail today as I started work on my L-2 bird, motor mount installed- start the fin set in the next few days .
 

Attachments

  • 20190327_172126.jpg
    20190327_172126.jpg
    1.1 MB · Views: 11
  • 20190327_212054.jpg
    20190327_212054.jpg
    1.3 MB · Views: 11
  • 20190327_171708_resized_1_LI.jpg
    20190327_171708_resized_1_LI.jpg
    682.9 KB · Views: 11
Something like that Bruce. :p
Got the fins on and rear centering ring done- getting there slowly .
 

Attachments

  • 20190331_200352.jpg
    20190331_200352.jpg
    1.5 MB · Views: 9
Oh my .............:cool:
 

Attachments

  • 20190406_130530_resized_1.jpg
    20190406_130530_resized_1.jpg
    378.4 KB · Views: 6
  • 20190406_133959.jpg
    20190406_133959.jpg
    2.6 MB · Views: 6
Im pretty sure by the time its all said and done , I coulda bought and wrecked a couple really nice Hydro's o_O

Whats up with my Boltz- stellar season and 0-2 , We HAVE to win tonight.
 
Back
Top