Header Gasket Supplier

[Tim Strange]

Looking for someone who supplies header gasket (or material I can cut) for CMB .67 and .45 motors. Also would like to find header springs...

I have tried several web-sites, but haven't found anything.

Thanks, Tim

 

[FloridaScaleBoater]

Looking for someone who supplies header gasket (or material I can cut) for CMB .67 and .45 motors. Also would like to find header springs...

I have tried several web-sites, but haven't found anything.

Thanks, Tim

Tim, there is a silicone material from McMaster Carr it is an opaque clear/white silicone

I have some, but haven't had to order in quite some time, so I don't have the part#

As far as the spring, call McMaster Carr customer service,, they can usually find the springs you need if you fax, or email them a picture, with measurements.

 

[HendricX]

2 Viton o-rings on the engine , or in the manifold.

Or try to find silicone-tubing of the right size , and cut it in (wide) rings.

 

[TimothyJones]

Tim,

If you let me know what ID and OD, I can help you.

I carry all wall thickness and will sell you what you need other than 2 feet Min order per size from McMaster.

I also may have one or two springs if you have overall length.

Tim

 

[seaducerpete]

Give stu barr a call he is the cmb importer he will have everything you need

 

[FloridaScaleBoater]

Tim,

If you let me know what ID and OD, I can help you.

I carry all wall thickness and will sell you what you need other than 2 feet Min order per size from McMaster.

I also may have one or two springs if you have overall length.

Tim

It is McMaster Carr P.N. 51135K88 5/8" ID X 7/8" OD X 1/8" wall Firm white

 

[Tim Strange]

Thanks for the info guys.