Hammerhead
Well-Known Member
- Joined
- Apr 5, 2002
- Messages
- 1,680
Up for grabs is the District 8 2012 High Points Champion boat.
It has been well used. May need new paint. It is set up to run with the Zipp Kits Z Strut, rudder, and turn fin.
You will have to make your own engine mount using 1/4" aluminum stock and 1/2 inch rubber dampers.
Looking for a Mark Sholund:
1440 B/C Reduced
3.10" (T.E.) Cup
2.14" (C.O.B.) Pitch
37.17 mm Diameter
If you order one of these new from him and have it shipped to me, plus 10 bucks to ship CONUS only, It's yours.
It is shown in the photo with the rudder on it, and the boat stand. These don't come with it.
Marty Knox
It has been well used. May need new paint. It is set up to run with the Zipp Kits Z Strut, rudder, and turn fin.
You will have to make your own engine mount using 1/4" aluminum stock and 1/2 inch rubber dampers.
Looking for a Mark Sholund:
1440 B/C Reduced
3.10" (T.E.) Cup
2.14" (C.O.B.) Pitch
37.17 mm Diameter
If you order one of these new from him and have it shipped to me, plus 10 bucks to ship CONUS only, It's yours.
It is shown in the photo with the rudder on it, and the boat stand. These don't come with it.
Marty Knox
Last edited by a moderator:
