• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

F/S mark shouland octura 1440 prop

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dan Hutchinson

Well-Known Member
Joined
Dec 30, 2008
Messages
1,173
F/S is as stated a octura 1440 lynx cut prop the measurements are 2.90 T.E cup, 2.48 C.O.B pitch and 38.50 mm dia asking 38.00 shipped
 
Some good numbers on that one.

I am running almost the same numbers on my 12 Hydro, working very well.

Dan you may want to have someone look at your motor?

Thanks,

Mark Sholund
 
Last edited by a moderator:
mark !! I don't run a 12 hydro. and my motor is new just barely broke in. (keep 21) it screams with the right prop and it didn't like this one so it was just sitting in my tool box. time to sell it. anyway Hows my order coming ????
 
Dan,

Going to Hobart tomorrow.

I know you run tunnel hulls, but they both run very similar propellers.

Thanks,

Mark Sholund
 
Last edited by a moderator:
Back
Top