Connection

[mr_fons]

Merry Christmas all,

I am going to trying out something new that I've seen on other
boats where the servos are on the outside of the radio box.

Question, What method are you using pass the wire into the radio
box to connect the servo to the receiver inside the radio box?
Pictures please!

Thanks
Fons

 

[P THOMAS]

You can unpin the connector wires and pass them thru some small fuel tube then use some goo or silicone to seal the tube or use a tyrap.
Another method is use short servo extensions thru the box wall and connect the servo plug to those so you can replace a bad servo, use some corrsion x on the servo plugs I use this small box for my battery, receiver and telemetry

 

[mr_fons]

Thanks Phil great ideas.

Fons

 

[Ray Sametz]

Pic of what Phil described.