• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts Wanted CMB Header and Pipe


Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I'm needing another header to fit my "2017" OPS .45 marine engine. The stock OPS header is nice, however I need more angle for use in my mono. I believe the stock header is approx 5-degrees, I'm in need of at least 12 or 15- degree's.

The OPS .45 exhaust port OD = 19.00mm (.748 in)
The OPS .45 header ID = 23.50mm (.925 in)

Looks like your A/A .45 header ID may be too small? Hard to believe the A/A .45 engine exhaust port is that much smaller?


  • Youngblood_40Mono-Circa1988_dbryant_Mar2022_02.JPEG
    665.6 KB · Views: 24
  • Youngblood_40Mono-Circa1988_dbryant_Mar2022_03.JPEG
    601.8 KB · Views: 24
  • Youngblood_40Mono-Circa1988_dbryant_Mar2022_04.JPEG
    623.1 KB · Views: 24