- Joined
- Oct 25, 2004
- Messages
- 1,130
Adapter for mounting CMB RS EVO 91/101 on a Lawless Cutthroat lower.
Comes with screws, o-ring and viton oil seals in both front housing and baseplate + squaredrive of course.
The oil seal mounted in the baseplate is not strictly necesary.
Fronthousing is made for the RS EVO engine with the big bearing (6201)
If you have a small bearing fronthousing (6001) with circlip, you will have to remove the small spacer sitting on the crankshaft prior to mounting this frontbox.
Parts are made from 6082T651 aluminium.
Price is $200,- and does not include shipping or fees.
Shipping is $37,- for insured traceable parcel, and $20,- for uninsured untraceable parcel
If you need a big bearing I will including a SKF Explorer 6201 TN9/C3 for $25,- extra, which is pretty much the best you can put in there.
Comes with screws, o-ring and viton oil seals in both front housing and baseplate + squaredrive of course.
The oil seal mounted in the baseplate is not strictly necesary.
Fronthousing is made for the RS EVO engine with the big bearing (6201)
If you have a small bearing fronthousing (6001) with circlip, you will have to remove the small spacer sitting on the crankshaft prior to mounting this frontbox.
Parts are made from 6082T651 aluminium.
Price is $200,- and does not include shipping or fees.
Shipping is $37,- for insured traceable parcel, and $20,- for uninsured untraceable parcel
If you need a big bearing I will including a SKF Explorer 6201 TN9/C3 for $25,- extra, which is pretty much the best you can put in there.
Attachments
Last edited:
