Christmas Give Away 2

[Kez]

Ok, I have a 4" dubro motor mount and a

5" mount. Both are new and undrilled

I will cover shipping if in US

One per person please

Merry Christmas

Mike

If the 4" Octura mount is still available, I can certainly use it.

I feel bad for taking it since I do not have anything to give away. I will be happy to buy it. Please PM me for address.

Thanks,

kez

 

[mike stover]

Ok, I have a 4" dubro motor mount and a

5" mount. Both are new and undrilled

I will cover shipping if in US

One per person please

Merry Christmas

Mike

If the 4" Octura mount is still available, I can certainly use it.

I feel bad for taking it since I do not have anything to give away. I will be happy to buy it. Please PM me for address.

Thanks,

kez

Kez,

Sent you a pm.

Send me your address and i will ship it right out

Merry Christmas and Happy new year

Mike

 

[Kez]

Ok, I have a 4" dubro motor mount and a

5" mount. Both are new and undrilled

I will cover shipping if in US

One per person please

Merry Christmas

Mike

If the 4" Octura mount is still available, I can certainly use it.

I feel bad for taking it since I do not have anything to give away. I will be happy to buy it. Please PM me for address.

Thanks,

kez

Kez,

Sent you a pm.

Send me your address and i will ship it right out

Merry Christmas and Happy new year

Mike

Hi Mike,

I have PM'ed you my address. It is very generous of you to cover the shipping.

I am restoring a mono that I built in the 80's. I used the same 4-60 mount but I milled it out to accept a Picco. The mount is too wide now for an OS which I am planning to use. I've been looking for this mount.

Thanks and Happy New Year.

kez

 

[johnbelanger]

i could use the k&b prts

thanks john

Since it is Christmas,I guess I will let go of a few more things;

10.K&B 7.5 inboard parts,3 cranks(.2150 pin)3 frt hsgs,1 disk assy,1 alum flywheel and 1 brass flywheel

11.K&B 7.5 inboards parts,frt hsg assy w/crank(.2340 pin)no flywheel

12.Futaba MC230CR esc gone to mtchbnntt

13.Picco .21 P5 crank,flywheel,backplate and 2 cooling heads gone to mark sholund

14.Picco .21 EXR crankcase gone to mark sholund

15.Mac .21 crankcase 1 5/8 fin dia. gone to mark sholund

16.OS .21RG crankcase assy w/brgs,crank and exhaust adapter gone to dave roach

17.OS .46vrm 2 frt hsg assy w/brgs,crank and flywheel,2 disk assy.

18. HTB 360 hull w/radio box and 2 fuel tanks. gone to georgia scale boater

19. Miss Vegas sport 2o hull,w/full length rails,stk and hp turn fins,and strut and rudder gone to misshydro

Reply to this post only,ship to lower 48 states only,you pay actual shipping cost only.

I will help with rigging both hulls if needed.

 

[misshydro]

Since it is Christmas,I guess I will let go of a few more things;

10.K&B 7.5 inboard parts,3 cranks(.2150 pin)3 frt hsgs,1 disk assy,1 alum flywheel and 1 brass flywheel

11.K&B 7.5 inboards parts,frt hsg assy w/crank(.2340 pin)no flywheel

12.Futaba MC230CR esc gone to mtchbnntt

13.Picco .21 P5 crank,flywheel,backplate and 2 cooling heads gone to mark sholund

14.Picco .21 EXR crankcase gone to mark sholund

15.Mac .21 crankcase 1 5/8 fin dia. gone to mark sholund

16.OS .21RG crankcase assy w/brgs,crank and exhaust adapter gone to dave roach

17.OS .46vrm 2 frt hsg assy w/brgs,crank and flywheel,2 disk assy.

18. HTB 360 hull w/radio box and 2 fuel tanks. gone to georgia scale boater

19. Miss Vegas sport 2o hull,w/full length rails,stk and hp turn fins,and strut and rudder gone to misshydro

Reply to this post only,ship to lower 48 states only,you pay actual shipping cost only.

I will help with rigging both hulls if needed.

Bob I still have'nt recived the miss vegas yet.. Did you recive my payment from paypal yet?