building a radiobox

[zapster]

I am building a radiobox to my tunnel and trying to figure how to put the servos in there. Please send me pictures of how your boxes are set up. My mail is [email protected]

Thanks

 

[Jerry Dunlap]

Go to aquacraftmodels.com and click on the TS2.

Then click on the "Manual" and page through the manual to the section on installing the radio. That should give you a good idea on one method that works.

JD

 

[[email protected]]

I'll send you some pix when I can get my digital camera back.

But, the easiest way is to lay the servo flat, add two stumble blocks on each side of the servos and lay a length wise piece of wood, fiberglass, servo horns, etc..... on top of the stumble block across the servo and screw it down into the stumble blocks.

 

[MarkScott]

Take a look here to see pics/descriptions on how I've built radio boxes.

 

[Ronald van Essen]

I just sent some picutres to your email address.

Hope thats what you are looking for.

Ronald.

 

[Bob Kensill]

Just buy the radio box for the TS2. They are already built and sell for about $10.00.

 

[zapster]

Thanks to all who replied

I built the box my self.

 

[zapster]

Allmost finished

 

[Ronald van Essen]

Allmost finished

Hard to tell from the picture, but to be sure:

use some rubber seals to make the box waterproof where the cables go through.

Ronald.

 

[zapster]

Yes, i have the seals but they are not in place in the picture.

 

[racejunkie538]

Hi

Maybe this will give you an idea. Its for an Zen OB.

Greets Marc

 

[racejunkie538]

Hi ZAPSTER

sorry no pic, I think the file is to big.

give me your mail addres and I will send it.

Greets Marc