Slideblues
Well-Known Member
- Joined
- Oct 21, 2002
- Messages
- 4,535
Actually SJ clued me in on this quite a while back and it took me a while to get the testing done, Since then I believe Mike Z has also seen one run with this mod and thought the same.
Neat idea and EASY to install, My test was a std Irwin J pipe for 21 outboard, One piece .312 brass tubing inserted into tha stinger to the first cone, length 3 5/8" leaves bout 1/8"sticking out a stock length pipe, One small hole drilled in tha tube 1/16" right before the exit, a little JB weld and your done.
Guys this works!!!! You wont notice it on the stand as much as on the water, bark is gone and less noise, and I could NOT tell any performance loss what so ever.
Didnt have a DB meter handy for this test, But I would guess that this mod would pass the current rule purposal.........
Excellent mod Terry,
Gene
Neat idea and EASY to install, My test was a std Irwin J pipe for 21 outboard, One piece .312 brass tubing inserted into tha stinger to the first cone, length 3 5/8" leaves bout 1/8"sticking out a stock length pipe, One small hole drilled in tha tube 1/16" right before the exit, a little JB weld and your done.
Guys this works!!!! You wont notice it on the stand as much as on the water, bark is gone and less noise, and I could NOT tell any performance loss what so ever.
Didnt have a DB meter handy for this test, But I would guess that this mod would pass the current rule purposal.........
Excellent mod Terry,
Gene
Last edited by a moderator: