Anyone making a flywheel tool for RS 45

[shann harrison]

As posted some kinda tool to tighten the flywheel on my 45RS need something??????????????????????????Shann

 

[Joe Warren]

As posted some kinda tool to tighten the flywheel on my 45RS need something??????????????????????????Shann

Most local brg supply houses sell adjustable Expander wrench thats works perfect $10-12. These would normally be uses to disassemble hyd cylinders.jw

 

[shann harrison]

As posted some kinda tool to tighten the flywheel on my 45RS need something??????????????????????????Shann

Most local brg supply houses sell adjustable Expander wrench thats works perfect $10-12. These would normally be uses to disassemble hyd cylinders.jw

I'll try that and see Thanxs Joe

 

[Dan_Cousin]

I just use my teeth.

 

[namba276]

If your looking to remove a flywheel, a battery cable remover works awesome. Heat the flywheel evenly with a map gas torch with a little pressure against the collet (which is loosened so there is space between collet and flywheel) It will "pop" right off. Cheap and is exspandable to fit a variety of engines.

Bob

 

[Ron Jefferson]

Shannon,

I bought a tool for tightening the retaining nut on a grinder that works real good. They're readily available at a local tool supply place in London. For under $10 bucks it's a must have.

Ron

 

[ALLAN YUEN]

Bought used round nose pliers and touch on ends front bend 90 degree it is good working

 

[Norm Doerr]

Right angle spanner wrench.

 

[shann harrison]

Found one works great adjustable grinder wrench works great and cheap $4.99+ taxes .Shann

 

[John Knight]

Found one works great adjustable grinder wrench works great and cheap $4.99+ taxes .Shann

Tell me more about it and where you got it.