Samuel Hagan JR
Well-Known Member
- Joined
- Jul 18, 2010
- Messages
- 4,569
Anyone using a ABC prop on the Sport 40's. If so what.
You can become a Supporting Member which comes with a decal or just click here to donate.
Mark will these work with just a S/B?Sam,
Currently testing some new ones:
1915-17-45%
2015-17-45%
2115-17-45%
2116-15-60%/3
Thanks,
Mark Sholund
That would be good to know. If the one you tested was one of the older props, they did not work so well on a sport 40 when I tested.Not a 100 percent sure.
Are there any ABC props being tested on Sport 40?Sam, & Mike,
It was a 10 degree rake and a 50% blade area.
Too much blade area for most motors.
Happy Holidays,
Mark Sholund
Whatya run Sam?Just got done testing 3 new ABC props for Sport 40. Very nice. I kept hearing you have to change boat setup for these props and you don't. Not one bit. Thanks Jim for the expedited service.
Did the 2015 mill and back on pipe good?2015-19-38/2
2014-10-50/2
1915-19-38/2
In comparison to a 452/2 reduced to 50mm, detounged and Lynx cut.
The 2015 had very similar speed.
The 2014 had very similar speed but had more RPM
The 1915 was just too small for the power these motors put out.
Very happy with them.
The 19.
Enter your email address to join: