K Ken Webb Well-Known Member Joined Jun 14, 2007 Messages 921 Mar 5, 2011 #1 How do you adjust the throttle arm on the carb? Just opened up my new motor and it's spotless inside.
How do you adjust the throttle arm on the carb? Just opened up my new motor and it's spotless inside.
A Al Hobbs Legend of the NW Vendor Joined Aug 25, 2009 Messages 1,886 Mar 6, 2011 #2 Slide a piece of wood into the carb so the barrel can't roll over. Then loosen the nut holding the throttle arm in place. Rotate the arm to where you want it, then tighten up the nut. Al Hobbs
Slide a piece of wood into the carb so the barrel can't roll over. Then loosen the nut holding the throttle arm in place. Rotate the arm to where you want it, then tighten up the nut. Al Hobbs
K Ken Webb Well-Known Member Joined Jun 14, 2007 Messages 921 Mar 6, 2011 #3 Thank you. Thought that might be the way, but wasn't sure. Don't want to screw up a new motor.
LarryConrad Well-Known Member Joined Jan 20, 2007 Messages 2,773 Mar 6, 2011 #4 Mine just came in the mail a few days ago. I work weekends so have not had a chance to check it out yet.
Mine just came in the mail a few days ago. I work weekends so have not had a chance to check it out yet.
K Ken Webb Well-Known Member Joined Jun 14, 2007 Messages 921 Mar 6, 2011 #5 My motor is spotless inside. Hard to believe that a manuf. gives a darn about workmanship