A 3 1/6 drive dog 1/4 o/d

[Nigtmare]

were can I get this animal ?

thanks Nikos

 

[Hap Mulvany]

were can I get this animal ?thanks Nikos

94988[/snapback]

​

Find an old 3.5 K&B outboard prop shaft assy,drive the roll pin out put the dog on your shaft redrill the hole for the roll pin and you are in business.

 

[Preston_Hall]

So you will only have a 1/32" wall thickness?

Why would you need such a thing? The prop hub is much thicker.

 

[Nigtmare]

Preston I have one on my F/F 21 and it looks good.it is smaler then the hub but not by much.the next size up is 3/8 and that is to big.

Nikos

 

[Scott_T]

Octura have a 3/16 bore with 5/16 OD if that's any help. Part OC6DMM.

Cheers,

Scott.

 

[forresterace]

The 5/16" OC6DMM is the drive dog most commonly used by electric racers using mostly 40mm - 45mm props.

 

[Preston_Hall]

If you want to down size one then mount it to the shaft, put the shaft in a drill, and use a Dremel or coarse file to cut it down.