82U55 strut

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Glenn 787

Well-Known Member
Joined
Oct 22, 2004
Messages
1,173
Want to finally finish my Thomas 1985 Coors Light. Don't have setup instructions and was curious what's a good starting point on the strut depth?
 
The setup info says 1 inch from bottom to table, use some angle in the strut too. balance 21-22 inches. Add a airdam if it runs too light.
 
Mines at 1inch .300 at. rear and .900 in front flat bottom strut. Add 7 oz lead to the left front of sponson,mines on a pool noodle and all the way forward. a x455x3 will get you started butI run a toungless x460x3 by Andy Brown. Rockets off the corner
 

Latest posts

Back
Top