gene gager
Well-Known Member
- Joined
- Mar 29, 2004
- Messages
- 125
[attachm
ent=11725or_69pak_038.jpg] This is an old boat remod, taken out tested , changed, tested, again and again till got it working quite well. then disassembled and complete cosmetic redo. has: low mi 67 green (with new bearings) OS9 b carb, sombodys header with a polished Muck pipe and polished Hughes muffler. Hughes turn fin, antique rudder( works great) Jensen strut and new shaft log and new prop shaft and one secret stainless prop. new radio box with a hitec 645 and two 225 servos and NM1100ma batt. add your own reciever. all hardware polished. 3rd channel hooked to a violet valve. New PPG fuelproof lightweight bunk (designed so you can flip boat over without removing cowls).
spares are- 1 painted and test mounted rear cowl , 2 raw rear cowls , 1 raw engine cowl, painted rear fin and 2 nice molds so you can make your own cowls . paint job has never been wet yet, Its all PPG's best stuff with a fuel proof clear coat over graphics and paint. Will include can of PAK maroon paint and lots of extra graphics. on the water it runs, drives, and rides like a fast rigger. price including insurance and fright within the US. $2000.00 US gene
ent=11725or_69pak_038.jpg] This is an old boat remod, taken out tested , changed, tested, again and again till got it working quite well. then disassembled and complete cosmetic redo. has: low mi 67 green (with new bearings) OS9 b carb, sombodys header with a polished Muck pipe and polished Hughes muffler. Hughes turn fin, antique rudder( works great) Jensen strut and new shaft log and new prop shaft and one secret stainless prop. new radio box with a hitec 645 and two 225 servos and NM1100ma batt. add your own reciever. all hardware polished. 3rd channel hooked to a violet valve. New PPG fuelproof lightweight bunk (designed so you can flip boat over without removing cowls).
spares are- 1 painted and test mounted rear cowl , 2 raw rear cowls , 1 raw engine cowl, painted rear fin and 2 nice molds so you can make your own cowls . paint job has never been wet yet, Its all PPG's best stuff with a fuel proof clear coat over graphics and paint. Will include can of PAK maroon paint and lots of extra graphics. on the water it runs, drives, and rides like a fast rigger. price including insurance and fright within the US. $2000.00 US gene