3.5 Silver Bullet Pipe Length

[chuck]

Can anyone give me a good idea on pipe length. I'm running a older Rossi silver power head with a Silver

Bullet pipe. I've tried many props and I think the header should be cut but I don't want to cut the header

to short. Also do the Irwin pipes give you more rpm's than the Silver Bullet. Thanks...Chuck

 

[Scott Wadlow]

Can anyone give me a good idea on pipe length. I'm running a older Rossi silver power head with a Silver

Bullet pipe. I've tried many props and I think the header should be cut but I don't want to cut the header

to short. Also do the Irwin pipes give you more rpm's than the Silver Bullet. Thanks...Chuck

they are both good pipes i prefer the silverbullet and run it at about 2 inches from the 90 degree in the header at the motor to the weld by the coupler is a good place to start.......................Scott