Recent content by jeepers

Hey guys thanks for the reply. No one here in Colorado has full blown P class tunnels. The fastest fe tunnels here are P specs. Doug P. Its good to hear from you! Joe and I are thinking of going to Winter Warmups.

Hey Kris, I am working on this project with Joe. We were thinking of using this lower for the larger shaft, we like horsepower in Colorado Has some thing to do with the altitude I think. Can you give more details on your set up? Like the weight, prop size, esc. I am familiar with the...

Hi John, the boat stuffed probably due to driver (me)! that and it really is the first time on the water it needs more tuning. I am not sure of the weight,8-9 lbs?? which will change a bit I am trying a few escs. Joe's was caught on radar at 78-79mph, mine was slightly quicker.

Hello, that's actually my boat in the video. Joe's boat is the first boat that leaves the shore, his boat is turning a X467. The boat in the video is running on 4 year old Hyperion 5s packs (5s2p 8400mah) and is powered by a TP Power 56x80 1490kv motor, spinning a (borrowed from another racer)...

To me lanes on a race course is.... silly. Unless its in Track & Field. I mean if you want lanes I suppose you could set the course with a truck load of buoys. Seriously what motorsport has designated lanes? F1, nope. But certain rules are enforced and penalties are issued. How about something...

Hugh it comes in about 110-115. Hey Sean hows it going? I am still around, but I have been putting alot of hours in at work, and with some home remodel projects I have not had much internet time.

Hugh I am not sure of my actual amp draw. I am a little nervous about putting my eagle tree in the boat, but I only put about 3300 to 3700mah total back in the packs or roughly 1600-1800mah per pack. This set up gives the boat excellent balance. It has never blown over or flipped over in a...

My Whiplash 40 is set up as follows. Hyperion 45c 4200mah 5s2p Hydra 240 Neu 1527 1.5d that I bought from Raydee. Octura 457-460

wow awesome video thanks for the link!

I am calling you out Terry!!! REMATCH!!!!!

WHOA..... that guy is very lucky!

how beefy are you thinking??? I have seen one tunnel that used a single arm but the used a beefy turnbuckle from a RC car

My tunnel would handle fine as long as I kept the props in the 38-40mm range using the 645MG. when I started propping up to 42-45mm prop size's I could go in to a turn smoothly but it did not want to straighten up I would end almost going full left to try and straighten it out. I am also...

I also had some handling issues with mine and my dads tunnels, we were using 645MG's for steering, I switched both servos on the tunnels to Hitec HS -7955 TG 330oz/torque, Handling issues went away after changing to the stronger servos. My LSH uses a Savox SC1268 MG High voltage servo...

Ron I have a back up camera installed on my trailer, the video comes through on my trucks stereo.