Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Amp Eater
Reaction score
4

Latest activity Postings Media Albums About

    • Amp Eater
      Amp Eater replied to the thread Rigger with Saito 180.
      My lanky / wide stance 4 stroke rigger had no issues with prop walk / pure 3 point no ramp. Given the hull design I had to try a few...
    • Amp Eater
      Amp Eater replied to the thread Rigger with Saito 180.
      Saito 180 has a 8x1.25 mm thread This is steel and heavy made for the OS 81VR, should allow the engine to idle, given the additional...
      • OS 81VR Flywheel.jpg
      • OS 65-81VR Flywheel.jpg
    • Amp Eater
      Amp Eater replied to the thread 4 cyl. Outrigger Hydro.
      Saito 180 - 11k will need as an example ABC 3418 / 3.4"x1.8" for 6.12" total pitch. 55 - 60 mph
    • Amp Eater
      Amp Eater reacted to Christian Lucas's post in the thread 4 cyl. Outrigger Hydro with Like Like.
      Hi , i had running a rigger with a Webra T4-40 . This was a drumvalve 4 cycle motor with toothbelt drive of the valve drum ...
    • Amp Eater
      Amp Eater reacted to RaceMechaniX's post in the thread 4 cyl. Outrigger Hydro with Like Like.
      Thanks Brad, boredom has set in early this year and I took a JAE 21 sitting on the shelf and shoehorned the 56 Alpha motor into it. I...
    • Amp Eater
      Amp Eater replied to the thread 4 cyl. Outrigger Hydro.
      Craig, a 180 project is doable, Part of the fun is paving your way to make it happen. Tyler, the flywheel I used is aluminum see...
      • OS71804020.jpg
      • kjj.jpg
    • Amp Eater
      Amp Eater replied to the thread 4 cyl. Outrigger Hydro.
      No flow measurements Tyler, is this for a boat / what is the game plan? I did the break in with the engine in the boat - flywheel /...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top