• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

** CMB 100 w/ Extras ***

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Philmunsterman

Well-Known Member
Joined
Aug 1, 2009
Messages
469
I ran this Engine in my Rigger a few times. This Engine belonged to Joe Ingaro and was a back-up. It is in Very good condition, I would say still needs some break in time. Custom Water Jacket and Head. Extra piston, sleeve and head button. I'm not real sure about the mods on the engine. 375.00 plus Shipping. Call for details 314 691 9425. Phil

sawcmb90_zpsdc1b28d8.jpg
 
Phil,

This would work well for an F outboard project. What is the parts availability situation for it? Will it accept parts made for the latest CMB 101 production engine? Maybe Stu will chime-in. Thanks.
 
you can get bearings.piston and liner are not available that i know of.newer engines use 2 ball bearings,this uses 1 ball and 1 needle
 
Back
Top