- Joined
- Oct 24, 2002
- Messages
- 4,513
Well here is a new old boat, never been setup to run, just a sealer coat on the hull and sponson.
Got this from Tom Foley few years ago.
i plan to use some modern hardware on it and run it for fun or maybe race it a few times.
It is a Coyote but has the sponson cut like a roadrunner, and has a RR cowl.
Milled out the maple blocks for the motor mount plate and plan to use a rubber mount.
original motor mount
old hardware
The sponsons look like they should be spaced 4 inch out on the left and three inch out on the right.
This make the stance about 12 inches, the oal length of the boat is 35 inches.
Got this from Tom Foley few years ago.
i plan to use some modern hardware on it and run it for fun or maybe race it a few times.
It is a Coyote but has the sponson cut like a roadrunner, and has a RR cowl.
Milled out the maple blocks for the motor mount plate and plan to use a rubber mount.
original motor mount
old hardware
The sponsons look like they should be spaced 4 inch out on the left and three inch out on the right.
This make the stance about 12 inches, the oal length of the boat is 35 inches.