john schultheis
Well-Known Member
- Joined
- Sep 16, 2011
- Messages
- 708
need a good starting point on some props for the JAE gas the props I have are working but i'm just not getting the speed out of this thing like I should be....Thanks
JAE gas props
- Thread starter john schultheis
- Start date
Help Support Intlwaters:
- Joined
- Feb 15, 2004
- Messages
- 706
2716 20 * rake or a 2818 you will need to work with the prop cupping and relieving to get the speed and also to be able to slow down for racing and punch it to get back up to speed instanly. I also like a 2718/3 worked up but needs a totally different set up as it pulls a little but fast. Hope this helps. jerry
- Joined
- Jul 19, 2009
- Messages
- 404
Hi John mine was in the high sixties/low seventies once in a while with an ABC 2818
dwilfong
Well-Known Member
- Joined
- Jul 1, 2008
- Messages
- 5,968
A ABC 2818 is a great racing prop for a gas rigger. you will need to work on the boat setup and the eng set up to get the best out of it.
Real don't need to do ant thing to the prop this way you can reproduce the set up as thy break.
It needs to be hardened or you will not keep a consent set up and it will break quicker.
It will get you in the high 70's if setup right.
Real don't need to do ant thing to the prop this way you can reproduce the set up as thy break.
It needs to be hardened or you will not keep a consent set up and it will break quicker.
It will get you in the high 70's if setup right.
