• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts Wanted wtb cmb 101 piston and liner

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I also have 2 brand new in the package piston and liners, if you can verify the part number or sizes.

Not sure if they are .90's or 1.01's

if not interested.. no sweat.
part numbers are ..c-94062 and c-94010 please let me know what you have
 
John, a friend texted me today and let me know this was in question so I didn’t ship it on my ride home from work. Your welcome to look at your sleeve tonight and let me know if it’s a match. The sleeve Joe is referring to is the ‘2019 Evo 101 ‘ . When I posted a photo I assumed you knew it was a match. They are interchangeable for sure but if it’s for a twin they need to match. Let me know and I’ll ship or refund you. Jeff
 
John, a friend texted me today and let me know this was in question so I didn’t ship it on my ride home from work. Your welcome to look at your sleeve tonight and let me know if it’s a match. The sleeve Joe is referring to is the ‘2019 Evo 101 ‘ . When I posted a photo I assumed you knew it was a match. They are interchangeable for sure but if it’s for a twin they need to match. Let me know and I’ll ship or refund you. Jeff
it is ok to ship when you can...thanks!!!!
 
I also have 2 brand new in the package piston and liners, if you can verify the part number or sizes.

Not sure if they are .90's or 1.01's

if not interested.. no sweat.
my 2 new 101s were made in 2020 so they are the second gen piston and liners i think the part numbers are as follows...C94062 and C94010 let me know what you have
 
my 2 new 101s were made in 2020 so they are the second gen piston and liners i think the part numbers are as follows...C94062 and C94010 let me know what you have
John, thinking on it some more, there is also some differences in the piston molds. Not every engine guy/boater knows about it mainly because it wasn’t advertised. The wrist pin boss was enlarged a little at some point ,It is not much and the outside of the piston is exactly the same but it is slightly heavier and on a twin it would matter. You would have to dremel underneath to match the weight of it , if on a twin. With that said, I can refund you. Unless you have a single and this doesn’t matter ? Let me know, Jeff
 
Jeff the liner that i have is a match for the one in your photo....send it and thanks for taking the time to make sure I got the correct part
 

Latest posts

Back
Top