• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

RR 45 and MAC 45s

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Sadly, the sell off begins. I've held onto most of my boating stuff during a couple seasons off, and it's clear at this point that I won't have the free time to race at anywhere near the level I used to. I have free access to a lake, in my backyard, so I can run whenever I want, but it's not closed. The though of having a runaway 70 MPH rigger run into someone's $60K barefooting boat isn't appealing, so, as I find time to unpack things, I'm going to put most of my stuff for sale...

In the name of transparency, post questions and offers to the thread rather than sending PMs. The first person to post I'll take it, or something along those lines, gets it. Payment can be Paypal or money order. Shipping charges will be actual.

I'm starting with my .45 Roadrunner and a couple MAC .45 engines.

I bought the boat from someone else in D12. After I got it I went completely through it to freshen it up. I painted the sponsons and cowl with Klass Kote. I installed a Walt Barney tank and new flex shaft. I custom built the stand and it's included. I also installed a Don F needle base with OS needle. All 3 servos and radio switch are included. Add engine, pipe, receiver, battery, and fuel and it's ready to go. Asking price is $225 plus shipping.

I also have two MAC 45 engines.

One was in the RR. The person I bought it from said Don Ferrette had freshened it before he bought it. I only ran this at a few races. It was thoroughly flushed and lubed with after run oil after each day. Bearings feel good and compression is strong. Asking $175 plus shipping.

The second one is the engine I ran in my sport 40 for several seasons. This had quite a bit of use, but was still running strong at the last race. Plenty of people in D12 are familiar with how well this engine ran. It could use new bearings, although they feel ok. Compression is not as strong as the other engine, but the last time I raced it was strong as ever. Asking $150 plus shipping. In light of the cowl for the SS45 being located, I may keep this, but for now it's still available.

 

Other things that I should be able to find fairly quickly, but don't have pics of yet:

The AB parabolic .45 pipes and headers that were used with the above engines. The one from the RR is almost new.

Two uncut RR 45 ABS cowls. $20 each.

My PT SS45 sport 45. It is very well setup, but has been through lots of racing. Unfortunately, it is missing the cowl, lost it when I got too close to a buoy at the last race. $100 OBO. It seems the cowl was found. Temporarily off the market while I determine the condition of the cowl and rethink the price.

Futaba R603FS receivers. I had made the switch to 2.4 a couple seasons before retiring, so none of these have much use. I have several more of these than I will ever need. $65 each. Three spoken for, no more available for now

Five cell NIMH battery packs. Capacity is in the 2000 mah+ range. Same as receivers, have too many. I will run these through a cycler a few times to test capacity before selling. $10 each.

rr_1.jpg


rr_4.jpg


rr_3.jpg


rr_2.jpg
Chuck, i will take the Mac .45 for $175.00 plus shipping.

Let me know your paypal address please.

dick
what is your paypal address please.

dick
 
Sadly, the sell off begins. I've held onto most of my boating stuff during a couple seasons off, and it's clear at this point that I won't have the free time to race at anywhere near the level I used to. I have free access to a lake, in my backyard, so I can run whenever I want, but it's not closed. The though of having a runaway 70 MPH rigger run into someone's $60K barefooting boat isn't appealing, so, as I find time to unpack things, I'm going to put most of my stuff for sale...

In the name of transparency, post questions and offers to the thread rather than sending PMs. The first person to post I'll take it, or something along those lines, gets it. Payment can be Paypal or money order. Shipping charges will be actual.

I'm starting with my .45 Roadrunner and a couple MAC .45 engines.

I bought the boat from someone else in D12. After I got it I went completely through it to freshen it up. I painted the sponsons and cowl with Klass Kote. I installed a Walt Barney tank and new flex shaft. I custom built the stand and it's included. I also installed a Don F needle base with OS needle. All 3 servos and radio switch are included. Add engine, pipe, receiver, battery, and fuel and it's ready to go. Asking price is $225 plus shipping.

I also have two MAC 45 engines.

One was in the RR. The person I bought it from said Don Ferrette had freshened it before he bought it. I only ran this at a few races. It was thoroughly flushed and lubed with after run oil after each day. Bearings feel good and compression is strong. Asking $175 plus shipping.

The second one is the engine I ran in my sport 40 for several seasons. This had quite a bit of use, but was still running strong at the last race. Plenty of people in D12 are familiar with how well this engine ran. It could use new bearings, although they feel ok. Compression is not as strong as the other engine, but the last time I raced it was strong as ever. Asking $150 plus shipping. In light of the cowl for the SS45 being located, I may keep this, but for now it's still available.

 

Other things that I should be able to find fairly quickly, but don't have pics of yet:

The AB parabolic .45 pipes and headers that were used with the above engines. The one from the RR is almost new.

Two uncut RR 45 ABS cowls. $20 each.

My PT SS45 sport 45. It is very well setup, but has been through lots of racing. Unfortunately, it is missing the cowl, lost it when I got too close to a buoy at the last race. $100 OBO. It seems the cowl was found. Temporarily off the market while I determine the condition of the cowl and rethink the price.

Futaba R603FS receivers. I had made the switch to 2.4 a couple seasons before retiring, so none of these have much use. I have several more of these than I will ever need. $65 each. Three spoken for, no more available for now

Five cell NIMH battery packs. Capacity is in the 2000 mah+ range. Same as receivers, have too many. I will run these through a cycler a few times to test capacity before selling. $10 each.

rr_1.jpg


rr_4.jpg


rr_3.jpg


rr_2.jpg
Chuck, i will take the Mac .45 for $175.00 plus shipping.

Let me know your paypal address please.

dick
what is your paypal address please.

dick

Still need the mac 45 for 150 if you are selling it PayPal is good Shipped to 84115 My name is Chuck also.... LMK Thanks
 
Thanks for checking them out Chuck, i would like to have 3 hump packs and 1 flat in the 2000mah size . Pm sent to you.
Got it. Two 2700 mah humps, are cycling now. Will check when I get home and put another hump and a flat on.
 
I'll take the PT SS45 for $125 as long as shipping doesn't kill me. If you can give me a ballpark size & weight I'll look it up. It will be going to 48127, Dearborn MI

Thanks

Wally
I'll make a box for it and figure out an approximate weight. Give me a little while, have to get away from the computer and get some other things done today first.
Chuck, I haven't heard from you in a while. I now have the cowl from Dick but no boat. Hope everything is OK with you. Please PM me as I'd like to get the boat and do some testing. Season is shorter than I'd like up here.

Thanks

Wally
 

Latest posts

Back
Top