• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

WTB: 10 degree CMB 90 exhaust header

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dan_Cousin

Well-Known Member
Joined
Jun 5, 2004
Messages
645
It can be cut down but there must be at least an inch of pipe length left so I can fit a coupler.

It doesn't need the spring or orings.

If you have one PM me.

thanks
 
if you haven't found one yet i know tidewaters sells a new one for 34.00 plus s/h.
Dan - I just did two for Vince Baumann's new twin. I turned down the OD of the header so that it slides inside the neck of the pipe. Telescopes and keeps it from burning couplers. On my 90, I have it turned and I used a water cooled coupler like a gas pipe. No silicone coupler. Just two Viton O-rings. Works great.
 
Back
Top