Twin 91 Rigger

[Steve Caines]

Hi guy's, i'm putting together a Twin Rigger and i was wondering what are the pro's and con's with having 2 receivers in the boat. Cheers Steve.

 

[Don Ferrette]

Hi guy's, i'm putting together a Twin Rigger and i was wondering what are the pro's and con's with having 2 receivers in the boat. Cheers Steve.

It is the only way I will build a heat race twin. Been using dual rx's in them for years. B)

 

[julianconde]

I use only one receiver on my twin 101. Using 2 receivers is good because If you loose one or the other you can still shut it off or steer the boat.

 

[brett english]

Take note people how Dons pipe mounts are NOT mounted on the radio box lid(solid mount)....This is another must in my book..i dont care how much radio box tape you

use, this deletes the risk of ripping the lid off and loosing the pipes/soaking your radio gear..

 

[LarryConrad]

Don, my SGX is laid out very similar to your boat. Do you run your receiver antennas inside the radio box or are the exit tubes in the radio box lid? I will be running the steering and throttle on separate receivers and battery packs.