Look for an old post from Chris Fabbro he is the builder of this hull. I also remember setting mine up per direction from Kently Porter. I ran saddle tanks on CG which is 9 3/4 NR 5 port stinger drive 440 /3 blade. Put post to these two for more info but this is were I ran 55 very loose but heck of a good time in a race. Oh pipe was a OPS 3280 or a copy from Alan Hobbs. Jerry
no chris fabbro in the member list...........but i have kp's # . i also need a copy of the setup sheet for the gen 2/raised front deck for valvola clearance version .21 hull.
That is the one Terry, But as I stated the CG needs to be 9 3/4 especially with the more powerful motors. Good Luck it is a great fun boat wish the class was still popular here in District 1 I would still be running one.