Neal Baughman
Member
- Joined
- Aug 31, 2009
- Messages
- 9
Hello my name is Neal Baughman, My father Denis Baughman ran boats in both Florida and Texas. Lastly he was a member of NTMPA in Dallas / Ft. Worth. He passed away over 10 years ago. During that time friends and family have been given and used various engines and boats that Dad ran. At this point my mother and I decided that it was time to move on, so we are selling the boats and motors thatt are letf. FYI I get my nitro fix by flying control line speed and racing. I can probably answer your questions about some things as I helped him run a lot of these boats. However, I am no expert regarding these boats so If I make a mistake about type or class of boat and motor please forgive me. I will post links to my photobucket account so that I do not overwhelm everyone with pics. All of my prices are OBO. Please make offers. Mom and I would like to see these go to someone who will actually use them.
SOLD: Thank you. First : a 45 Hydro. I think it is a Coyote. It includes a CMB 45 motor. It is basically ready to run, just change the radio. Asking $300.00
My link
SOLD: Thank you. Second: 21 mono. A fiberglass hull, no idea of type. Shows prop run-over damage (Good racing), picco 21 engine. Basically ready to run, just change the radio. Asking $250.00
My link
Third: 90 Hydro. Once again i think it is a Coyote. It includes a CMB 90 engine. The engine is damaged. It appears to have galling on piston and sleeve. Dad had taken it apart and was working on it but did not finish it. New parts and re-install the motor and change the radio and it is ready to go. Hull is finished and ready to run. Asking $250.00
My link
Fourth: 45 Hydro incomplete. I do not know what hull type. Hull and sponsons painted and ready to take hardware. I am including a CMB 45. Also whatever hardware I was able to find. This is shown in the pics. I also have some of the patterns and forms for building the boat. (if you need to repair it after a race). Asking $225.00
My link
Fifth: 65 Hydro. Partially complete kit. Once again I think this is a coyote. The boat has been assembled but not fitted with hardware, or finished. The kit and as much hardware as I could throw in with this kit. It also includes what appears to be patterns and templates to build the Coyote. Also includes the Coyote instruction manual. It also appears to have parts of another hull, 2 cowls, and parts to make even one more. Includes a CMB 65 engine. It is taken apart as Dad was working on it, but never finished it. Asking $225.00
My link
SOLD All of the Picco engines and parts. Thank you. Sixth: Engines and engine parts, and misc parts. I still have the test stand and starter. $15.00 for the starter and Free plus shipping for the test stand.
Picco 67, Picco 45, Picco 65 parts (probably enough for one engine), Picco 45 parts (once again probably enough parts for one complete engine.), A boat electric starter (designed for boats so I cannot use it.), a custom designed engine test stand. The test stand is missing the motor mount but is designed to attach to a marine engine and run with a propellor through a home made propellor adapter (made from a K&B torp 29 case). The bak was designed to hold a gallon of water to use as cooling water during test runs. Includes moount for 1/4 flex shaft. All Oak construction. Asking $175.00
My link
Shipping will be as inexpensive as I can get it. But boats are heavy and big. But I think shipping on each should be around $20-$30. I will take $1200 for all of it and throw in shipping for free.
Please refer to my e-bay account and GunBroker accounts for further references. Also I know of several guys on this forum who ran with Dad in Miami/Boca Raton, Houston and Dallas/Ft Worth.
Thank you and please feel free to ask any questions. You can also e-mail me at [email protected]
-Neal Baughman
SOLD: Thank you. First : a 45 Hydro. I think it is a Coyote. It includes a CMB 45 motor. It is basically ready to run, just change the radio. Asking $300.00
My link
SOLD: Thank you. Second: 21 mono. A fiberglass hull, no idea of type. Shows prop run-over damage (Good racing), picco 21 engine. Basically ready to run, just change the radio. Asking $250.00
My link
Third: 90 Hydro. Once again i think it is a Coyote. It includes a CMB 90 engine. The engine is damaged. It appears to have galling on piston and sleeve. Dad had taken it apart and was working on it but did not finish it. New parts and re-install the motor and change the radio and it is ready to go. Hull is finished and ready to run. Asking $250.00
My link
Fourth: 45 Hydro incomplete. I do not know what hull type. Hull and sponsons painted and ready to take hardware. I am including a CMB 45. Also whatever hardware I was able to find. This is shown in the pics. I also have some of the patterns and forms for building the boat. (if you need to repair it after a race). Asking $225.00
My link
Fifth: 65 Hydro. Partially complete kit. Once again I think this is a coyote. The boat has been assembled but not fitted with hardware, or finished. The kit and as much hardware as I could throw in with this kit. It also includes what appears to be patterns and templates to build the Coyote. Also includes the Coyote instruction manual. It also appears to have parts of another hull, 2 cowls, and parts to make even one more. Includes a CMB 65 engine. It is taken apart as Dad was working on it, but never finished it. Asking $225.00
My link
SOLD All of the Picco engines and parts. Thank you. Sixth: Engines and engine parts, and misc parts. I still have the test stand and starter. $15.00 for the starter and Free plus shipping for the test stand.
Picco 67, Picco 45, Picco 65 parts (probably enough for one engine), Picco 45 parts (once again probably enough parts for one complete engine.), A boat electric starter (designed for boats so I cannot use it.), a custom designed engine test stand. The test stand is missing the motor mount but is designed to attach to a marine engine and run with a propellor through a home made propellor adapter (made from a K&B torp 29 case). The bak was designed to hold a gallon of water to use as cooling water during test runs. Includes moount for 1/4 flex shaft. All Oak construction. Asking $175.00
My link
Shipping will be as inexpensive as I can get it. But boats are heavy and big. But I think shipping on each should be around $20-$30. I will take $1200 for all of it and throw in shipping for free.
Please refer to my e-bay account and GunBroker accounts for further references. Also I know of several guys on this forum who ran with Dad in Miami/Boca Raton, Houston and Dallas/Ft Worth.
Thank you and please feel free to ask any questions. You can also e-mail me at [email protected]
-Neal Baughman
Last edited by a moderator: