Recent content by Troy Glass

Buckshot thats probably a great way to put it seems very darty and a bit unpredictable as well . I don't race just a sport boater but when I was racing with a few mates on the weekend I found my self having to be very cautious in the rough water. It never looked like it was going to flip or roll...

Is any one finding there JAE gas rigger to be bouncing around alot in rough water? and if you are have you found a way to fix it. The boat is running really well in calm water its running in the low 70's with a RZ RCMK with a 3016 ABC prop.

Thanks Luca, thats about what length I was thinking problem is i don't no if i will be actually able to shorten it that much.

I Have just built a JAE .21 rigger and have fitted a .21 Rossi buggy engine to it that i have had laying for a while and I just was wondering what a good starting point for the pipe length would be. I probably have a bit of a odd combination of parts but its what i had available. I'm using a CMB...

Just wondering if any one can tell me the reason for only sharpening the outside edge of hydro turn fins and not both sides?

Thanks for that Tyler what size prop are you running?

I have a CMB RS35 Gas engine I want to make A rigger for and I was thinking of using the JAE .91/1.01 plans and scaling it up, but how big do you think it would need to be? would 50 inch's be long enough with maybe 3 inch's wide sponsons? what are your thoughts.

Hi Glen i run my os vrm 81 that have 9B carbys std on 1 1/2 on the high 2 1/2 on the low speed.

Ill be running a Omen Racing modded(Australia company) rear exhaust RCMK.

Thanks Steve I had a look and it is an octura prop but that has me wondering even more. The 2175 is 75mm dia and 157mm pitch. Dose that prop seem pretty big? Were as the ABC 2718 is only 68mm dia 116mm pitch that a pretty big difference. Would be interesting to no what people are running on...

Hi I have just brought a JAE Gas rigger kit from zippkits and I am a bit confused about what prop to use. In the manual it states a good starting prop is a ABC 2175 but ABC don't even list that prop on there web site, and if you look on the zippkits site they say a ABC 3018 for a RCMK RZ 254 and...

Just wondering if any one has tried to look at the MHZ website lately it doesn't seem to be working for me for some reason.

Hi I've been looking on the JAE site about info on their gas rigger the are developing and I was just wondering if any one know if or when they will be putting the plans up on there sit like the others.

Thanks fellas for all the reply and tips on how to get in going, I have tried a fair few different props including the x 447 and also a lot of strut adjustments i have just about worn the thread of the bolt. The only thing i have tried is the different rudder lengths, its just the seducer rudder...

Hi Chis, do you reckon you could send me some photos of your dads boat with a straight edge on it so I can see what it is like my email is [email protected]. I agree in heat racing with choppy water it would go well but i don't race just a hobbyist so I want to try get it sitting on its...