Help Support IntlWaters by donating using the link above.
Mounting Radio box
Posted 12 February 2018 - 02:59 AM
Posted 12 February 2018 - 06:53 AM
I used silicone to put them down, if needed to take back up easy to release
Posted 12 February 2018 - 07:13 AM
Yep silicon. When you want to remove, use dental floss and cut thru it by pulling from one end.
Posted 12 February 2018 - 10:25 AM
I prefer to silicon a radio box tray to the hull and use cup hooks and rubber bands to hold the radio box in place.
Posted 12 February 2018 - 11:48 PM
Posted 13 February 2018 - 06:39 AM
Do like Jerry said also use the rubber bands you should be ok
Posted 13 February 2018 - 09:57 AM
Build a wood cofferdam (spelling) around the base of the box with hardwood, epoxy down in place.
This will keep the box from moving side to side or for & aft,
Put 4 cup hooks down into the hardwood base.
Rubber bands over the top to hold it in place
Posted 16 February 2018 - 03:54 PM
Sikaflex is awesome and very strong, yet will flex with hull movements.