Alpha Series Jaguar 3 Build (20 Size)

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
These might be available sometime in the future. That all I can say on that topic.
Mike

PS it is not me
Yes, I know the full story. We'll see how that whole affair turns out.

I've got a 40 boat from the same source that was their personal boat we're doing some touch up on....always loved those late model Jags.
 
and for Bill Gibson..

A version of the pic

WITH

Jack Garcia's K+B shirt (Circled)
and pointing too...
The original hand written K+B fuel formula right from Jacks wallet.

We became INSTANT buddy's the first time we met.
Jack Garcia.jpg
Grim
 
Last edited:
well.. this took FAR TO LONG to complete. (Almost 9 years).. again and sorry for yacking this AGAIN.. HEED ALL EPOXY WARNINGS!

First and for most RIP Bob the Boat Builder! And thank you.

THE BOAT.. is a Jaguar "Alpha 21"
Powered by OS VZ
Guided by Futaba
4.6lbs Ready to go

Some pictures...
Paint is Delfleet
The servo tray is .015 carbon plate, the plate is mounted on grommets
Pipe will be 3280 to start

Remaining to do
Sharpen the fin
Build a new tank (that's an old Ninja tank)
Finish the pipe install

As for Futaba
Start with my 7PXL (I have a few more systems I want to try in the boat)
R324rx
BLS571 on the rudder
S3270svi on mix and throttle
Futaba 01G GPS
Futaba 800mah life pack

MAN I LOVE RC BOAT RACING!

Grim
 

Attachments

  • 20240603_202221 (Medium).jpg
    20240603_202221 (Medium).jpg
    153.1 KB
  • 20240603_202315 (Medium).jpg
    20240603_202315 (Medium).jpg
    219.1 KB
  • 20240603_202320 (Medium).jpg
    20240603_202320 (Medium).jpg
    213.4 KB
  • 20240603_202339 (Medium).jpg
    20240603_202339 (Medium).jpg
    227.4 KB
The pipe mount is custom made. The pipe tip holder is sleeve retained to the pipe and stays with it forever more. (I have made a number of them for some other pipes as well)

The carbon fiber parts work out better then I had hoped. (so far) plenty of adjustment.

I tabled the boat last night and did the initial setup on it. I will check over everything soon and start with the tank that's in the boat. (Still need to build the new one)..LOL.. lazy I guess.

I charged the battery's last night and did the final radio setup.

I typically don't use 3rd channels in a boat but big B made me put one in.. LOL.. anyway my fail safe is set to richen the boat as well as pull down the power if it kicks in.

Grim
 
I am having to make a radio equipment change in the boat. The throttle and mix servos I had in it were a poor choice (that was on me).

I damaged one and because I got them so long ago I will just replace them with more modern units.

So.. the entire tray had to be removed and a complete redo is underway.

Update when I can.

Grim
 
I am having to make a radio equipment change in the boat. The throttle and mix servos I had in it were a poor choice (that was on me).

I damaged one and because I got them so long ago I will just replace them with more modern units.

So.. the entire tray had to be removed and a complete redo is underway.

Update when I can.

Grim
Welp!....we've a simple solution for ya, Grim!.... we'll gladly take that rig off yer hands for a cool $500....whatta ya think? 🤔🤔🤔🤔
 
LOL.. thinking..

HONNEY.. can I sell my Ja..................................That a nope...

TRUST ME.. she is a HYDRO RACING NUT.. (just ask Ron Jr)

Her tag line for Ron Jr is "NOW THATS RACING"

Grim
 
Back
Top